Laserfiche WebLink
Construction Quality Assurance(A Plan Extension of Closure Cap <br /> Corral Hollow Sanitary Landfill August 21, 2008 <br /> supplied. These properties shall meet or exceed those properties established in the <br /> GCL section of the Specifications. The GCL Manufacturer will provide the <br /> Geosynthetics CQA Consultant with a written certification signed by a responsible <br /> party that the GCLs actually delivered have "minimum average roll value"properties <br /> which meet or exceed all property values guaranteed for that type of GCL. <br /> The CQA Consultant will examine the GCL Manufacturer's certifications to ensure <br /> that the property values listed on the certifications meet or exceed those given in the <br /> Specifications. Any deviations will be reported to the Project Manager. <br /> 4.2.2 Labeling <br /> The GCL Manufacturer will identify all rolls of GCL with the following: <br /> ♦ manufacturer's name; <br /> ♦ product identification; <br /> t ♦ roll number; and <br /> ♦ roll dimensions. <br /> Additionally, if any special handling of the GCL is required, it will be so marked on the <br /> top surface of the GCL, e.g., "This Side Up". <br /> The Geosynthetic CQA Consultant will examine each roll upon delivery and any <br /> deviation from the above requirements will be reported to the Engineer. <br /> 4.2.3 e Shipment and Storage <br /> 9 <br /> GCL cleanliness and moisture isolation are essential to its performance. Therefore,the <br /> Contractor shall ensure that all GCL rolls are appropriately protected from moisture, <br /> debris, excessive heat or cold, direct contact with the ground, direct sunlight or other <br /> ultraviolet (UV) source, puncture, cutting or any other damaging or deleterious <br /> conditions. The GCL wrapping shall not be removed until the day of placement. <br /> Vector Engineering, Inc. .143E Spring Hill Drive•Grass Valley, CA• (530) 272-2448 <br /> -22- <br />