CORRESPONDENCE_2013 - Laserfiche WebLink

Home Browse Search

120722NSV.doc December 3, 2012 Page 2 of 5 Stockton, CA 95201, (209) 948-3656. All work requiring traffic control must apply for -a closure number seven days prior to start of work. No closures on HOLIDAYS or WEEKENDS. All work under this permit must meet with the approval of the State Representative. Failure on the Permittee's part to comply with any provision will be cause for revocation of this permit. IMMEDIATELY FOLLOWING- COMPLETION OF WORK PERMITTED HEREIN, PERMITTEE SHALL FILL OUT AND MAIL NOTICE OF COMPLETION PROVIDED BY GRANTOR. Permittee's attention is directed to Section 6, "CONTROL OF MATERIALS", of the State Standard Specifications Reference to Engineer in the State Standard Specifications shall include State Representative. Permittee is directed to Standard Specification section 7-1.11 Preservation of Property, and Business and Professions Code, Section 8771. Permittee shall physically inspect the work site and locate survey monuments prior to work commencement. Monuments shall be referenced or reset in accordance with Business and Professions Code. Permittee/contractor shall work with the State representative to request the necessary lane closure needed. Request shall be the week prior to the actual work. The State representative shall submit closure through the Lane Closure System (LCS) for Traffic Management Center (TMC) approval by Wednesday afternoon of the week prior. All Lane closures shall be called in by either the contractor to the TMC when the closure begins (10-97), ends (10-98), or is cancelled (10-22). The TMC can be reached (24-7) at (209) 948-7556 or 7551. Use proper traffic control devices throughout the duration of the project as per Caltrans Standard Specifications. A pre -job conference with the Permittee, Contractor, and State Representative may be required prior to start of work. Permittee shall contact the State Representative and arrange the meeting. This meeting may be waived at the discretion of the State Representative. Notwithstanding General Provision #4, your contractor is required to apply for and obtain an encroachment permit prior to start of work. Permittee shall, prior to commencement of any work, provide the State Representative with the name and phone number of the person in responsible charge of the work to be performed under this permit. The general area in the vicinity of the proposed permit work may be environmentally sensitive. All mitigation and related work, in accordance with General Provision No. 26, is the responsibility of the Permittee. In addition to the attached General Provisions, the following special provisions are also applicable: 2