Laserfiche WebLink
SlConnect Piping <br />0 Install plain end fittings <br />0 <br />4" Plain End <br />Screw plcin end fittings (included) into bulkhead fittings using pipe thread sealant or tape <br />approved for use with plastics. 6" connection types come pre-installed from the factory. <br />0 Connect interceptor to drain lines <br />ABOVE <br />GRADE <br />BURIED INSTALLATION <br />Inlet <br />Outlet <br />cleanout tee <br />K f <br />COUPLING DETAIL <br />Drain <br />line <br />Flexible coupling <br />Plain end fitting <br />Bulkhead fitting <br />FLOOR BELOW INSTALLATION <br />Vent per local <br />Kitchen floor <br />Add this vent if unit is installed <br />one or more floors below the <br />fixtures being served <br />Place unit into final position and set level. Mechanically couple inlet and outlet drainage lines to <br />unit. Do not solvent weld. Ensure all upstream fixtures are trapped. Vent per local code. Installation <br />of 2 -way cleanout tees to grade (by others) is recommended for buried installations. <br />paqe 8 of 10 Schier I GB -50 Installation Guide <br />