COMPLIANCE INFO_FILE 2 - Laserfiche WebLink

Home Browse Search

4. Corytinuous monitoring devices Continuous monitoring devices shad be installed and used to monitor temperature; injec- tion pressure, flow rate, and volume; and the annular pressure and fluid volume between the tubing and the long string casing above the packer. 5. Automatic Alarms, Shut-Off Devices and Operator Requirements The permittee shall continuously operate and maintain an automatic warning system which will immediately notify the operators of a malfunction in the event that the injection pres- sure at the wellhead exceeds the maximum injection pressure authorized by this permit. This system shall be in operation at the time this permit becomes final. The permittee will extend the above described system to provide for automatic shut-down of the well in case of overpressure. This automatic shut-down system will be in operation no later than 90 days after this permit becomes final. A trained operator will be on duty during all hours when injection is taking place. D. REPORTING REQUIREMENTS 1. Quarterly reports The perrnittee shall submit short and accurate quarterly reports to the Director containing the following information: (a) Results of the injection fluid analyses specified in permit condition Part I1, Section C, Item 2. (b) Daily and monthly average, as well as daily and monthly maximum and minimum values for the continuously monitored parameters specified in Part II, Section C, Item 3. (c) Equipment calibration. (d) A narrative description of all non-compliance which occurred during the reporting period. 2. Reports on Well Tests and Workovers In the first quarterly report after the activity the permittee shall report to the Director the results of the following: (a) mechanical integrity tests; (b) other tests required by this permit; (c) any well workovers; and (d) the completion of any conditions included in Part III of this permit. 15