Laserfiche WebLink
. k' ■ KLEINEELDER <br /> A Kleinfelder, environmental geologist will be on site during the tank removal activities to <br /> .collect soil samples for qualitative field screening and laboratory analysis. Tank excavation soil <br /> samples will be obtained by scraping the sidewalls or excavation bottom at the desired locations <br /> with the backhoe bucket. Samples will then be collected from the bucket by packing soil in a <br /> clean brass tube with a clean hand trowel. The soil samples may also be collected using a slide <br /> hammer lined with a clean brass tube with appropriate extension to reach the desired sampling <br /> depth. The collected brass tubes will then be sealed with Teflon sheets and tight fitting plastic <br /> caps. <br /> A-8.2 Collection of Water Samples and Laboratory Analysis <br /> If water is encountered in the excavation after the tank is removed, a representative sample will <br /> be collected for laboratory analysis. The tank excavation may be purged and allowed to refill <br /> before sampling. The water sample will be collected using a clean disposable bailer with new <br /> nylon cord. The bailer will be retrieved and the water will be contained in appropriate bottles <br /> supplied by the analytical laboratory for the requested analysis. <br /> In accordance with the Tri-Regional Guidelines one water sample will be collected from the tank <br /> excavation. The water sample will be delivered under chain-of-custody procedures to a state <br /> certified laboratory. <br /> 27125.E01 /STO3R657 Page A-9 <br /> Copyright 2003,Kleinfelder,Inc. May 23,2003 <br />