Laserfiche WebLink
BONDERITZTechnical Process Bulletin <br /> BONDERITE M-CR 1200S AERO <br /> CHROMATE COATING <br /> (KNOWN AS ALODINE 1200S) <br /> PRECAUTIONARY INFORMATION: <br /> When handling the chemical products used in this process,the first aid and handling recommendations on the Material <br /> Safety Data Sheet for each product should be read, understood and followed. <br /> The following precaution should be observed during the operation of the BONDERITE M-CR 1200S AERO (known as <br /> ALODINE 1200S) coating bath: <br /> Adequate ventilation should be provided for the process area. Operators must not breathe BONDERITE coating bath <br /> vapors. Open containers in a well ventilated area. Keep containers closed when not in use. <br /> The processing bath contains chromic acid in excess of 0.1%when prepared as recommended. The following statement, <br /> or one similar to it, should be included as part of the process tank labeling. <br /> "Possible cancer hazard based on tests with laboratory animals. Overexposure may create cancer risk." <br /> NOTICE: <br /> The above information and recommendations concerning this product are based upon our laboratory tests and field <br /> use experience. However, since conditions of actual use are beyond our control, any recommendations or <br /> suggestions are made without warranty, express or implied. Manufacturer's and seller's sole obligation shall be to <br /> replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, <br /> direct or consequential, arising out of the use of this product. <br /> Henkel <br /> 7of8 <br />