Laserfiche WebLink
-� Page 5/12 <br /> J _ Safety Data Sheet (SDS) <br /> OSHA HazCom Standard 29 CFR 1910.1200(g)and GHS Rev 03. <br /> Issue date 08/08/2016 Reviewed on 08/08/2016 <br /> Trade name DeSmut NS3 <br /> Control parameters: <br /> All ventilation should be designed in accordance with OSHA standard (29 CFR 1910.94). Use local <br /> exhaust at filling zones and where leakage and dust formation is probable. Use mechanical(general) <br /> ventilation for storage areas. Use appropriate ventilation as required to keep Exposure Limits in Air <br /> 1 below TLV&PEL limits. <br /> Components with occupational exposure limits: ¥ <br /> 7664-93-9 sulfuric acid <br /> PEL Long-term value: 1 mg/m3 <br /> REL Long-term value: 1 mg/m' <br /> TLV Long-term value:0.2*mg/m' <br /> p *as thoracic fraction j <br /> 7697-37-2 Nitric Acid 1 <br /> PEL I Long-term value: 5 mg%m3, 2 ppm <br /> REL Short-term value: 10 mg/m3 4 ppm <br /> Long-term value:5 mg/m3 2 ppm <br /> TLV J Short-term value: 10 mg/m3 4 ppm <br /> i <br /> Long-term value: 5.2 mg/m3, 2 ppm <br /> Additional information: The lists that were valid during the creation of this SDS were used as basis. <br /> Exposure controls: <br /> Personal protective equipment: ' <br /> General protective and hygienic measures: <br /> The usual precautionary measures for handling chemicals should be followed. <br /> Keep away from foodstuffs, beverages and feed. <br /> Immediately remove all soiled and contaminated clothing and wash before reuse. <br /> Wash hands before breaks and at the end of work. i <br /> Avoid contact with the eyes and skin. <br /> Breathing equipment: <br /> l <br /> 3 <br /> •_• Suitable respiratory protective device recommended. <br /> Protection of hands: <br /> I <br /> Protective gloves <br /> The glove material has to be impermeable and resistant to the product/the substance/the preparation. 1 <br /> Due to missing tests no recommendation to the glove material can be given for the product/the <br /> preparation/the chemical mixture. <br /> Select glove material based on penetration times, rates of diffusion and degradation. <br /> Material of gloves: <br /> The selection of the suitable gloves does not only depend on the material, but also on further marks of <br /> quality and varies from manufacturer to manufacturer. As the product is a preparation of several <br /> substances, the resistance of the glove material cannot be calculated in advance and has therefore to <br /> be checked prior to the application. <br /> (Contd.on page 6) <br /> us._. <br />