Laserfiche WebLink
Notes! <br />AEGIS Anti -E <br />apment Shield <br />Be sure to remove existing main drain sump cover or grating. <br />Read and save these instructions for future reference — see drawings below for each numbered step. <br />1. Position AEGIS Anti -Entrapment Shield over existing main drain sump to locate anchors in pool structure. <br />2. Mark locations of (4) mounting holes. <br />3. Use a 3/8" carbide -tipped drill bit to drill hole. Hold drill securely and straight to prevent irregular shaped <br />holes. Clean out the concrete dust from holes as required. <br />• For file or plastered finish, drill a 1.5" deep hole and use the supplied 1.5" bolts to secure. <br />• For painted concrete finish, drill a 1" deep hole and use the supplied 1" bolts to secure.. <br />' The anchors are designed to be set in concrete only. <br />4. Drop anchor in hole and tap until flush with the concrete underneath the file or plaster finish. <br />5. To set drop-in anchor, expand anchor by inserting setting tool into anchor body and set with several solid <br />hammer blows. The anchor is set properly when shoulder of setting tool is flush with the top of anchor. <br />6. Align AEGIS Anti -Entrapment Shield over set anchors, insert bolts with washers and tighten to 80 inch/lbs. <br />' If the tile or plaster finish is thicker than 1/2", increase hole depth to assure anchor is fully set in <br />concrete. Longer bolts will be required. 114-20 UNC. Must be 316 stainless steel. <br />Any questions consult Neptune Benson, Inc 800-832-8002 <br />5 <br />a <br />r ° e <br />i 6Z11/ . y <br />! e � <br />f� <br />a <br />e R-5/5/11 <br />