Laserfiche WebLink
SECTION 13151 <br />SWIMMING POOL CONSTRUCTION <br />AEGIS ANTI -ENTRAPMENT SHIELD <br />SPECIFICATIONS <br />A. The AEGIS Anti -Entrapment Shield (AEGIS) shall be fabricated using fiberglass <br />with vinylester resin and finished with UV resistant gel coat. Top shall have a <br />molded non -slip surface. Included mounting hardware shall be type 316 SS in <br />accordance with the ASME code for suction fittings. <br />B. The AEGIS shall be 30" x 30" as defined by the ASME code for suction fittings. <br />The shield shall be designed and certified to ASME A I 12.19.8a-2008 VGB-2008. <br />C. The AEGIS shall be designed to permit flow only through the perimeter of the <br />device to maximize the product safety. Maximum flow rate @ 1.5 £p.s shall be 600 <br />GPM. NSF certified maximum flow rates shall be: Wall -1120 GPM, Floor -1432 <br />GPM. <br />D. The AEGIS shall be approved for use over any existing or field built main drain <br />sump providing the main drain sump isqualified by a "Registered Design <br />Professional'. <br />E. The AEGIS shall be certified by NSF and shall have a permanent data plate affixed <br />on the shield. <br />F. Shields (covers) constructed of stainless steel, or units that require grounding shall <br />not be considered. <br />AEGIS Anti -Entrapment Shield 1 <br />R 9/19/11 <br />