COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

Job Order Field 1927096-1 Jones Covey Group, Inc. 9595 Lucas Ranch Rd. Posted Rancho Cucamonga,CA 91730 888-972-7581 Job Details Description: ....................................................................................................--................................................................................................................................................................................................................................................................................... Helium Testing to locate& Repair Leak in 91 STP Product secondary Completion Notes: 10/08/20: 10-8-2020: Jose,Shawn- Arrived on site and checked in with site manager. Performed helium test on 91 secondary product line. I drilled holes in front of all udc's without getting any hits. I then proceeded to drill a hole right outside the 91 sump and was able to get percentage readings. 91 product penetration is leaking on the outside of the sump. Concrete will need to be broken out to make necessary repairs. I market the area where I got the percentage readings with marking paint. 10/27/20: Arrived on site and checked in with manager, worked on layout for Beeline Concrete cutting, saw cut concrete on 91 STP sump 8'x 12'x 10" demo concrete and removed it. Badger dug to find the 91 secondary leak, isolated the 91 secondary line from smart sensor and installed a test gauge 0 to 15 psi on 91 secondary line. Pressurized the secondary line and soaped exposed fittings, found leak on the STP sump penetration. Cut the secondary line and removed the 3" pipe from STP sump penetration, cut the secondary line 3'away from the sump wall and installed 3"secondary clamp shell, glued the secondary and let cure the glue. Tested the 91 secondary line at 5 psi and soaped the 3"secondary clamp shell coupling and STP sump penetration, after we tested the secondary line with pressure, changed the gauge to vaccum then tested secondary pulled vacuum at 15 inch. Set chain link fence panels around the work area. Cleaned up and secured site. 10/28/20: Checked in with manager, worked on sanding penetration outside the STP sump for secondary line and applied Bravo epoxy for reinforcement. After the Bravo epoxy cures, prepared the penetration and secondary pipe sanded then fiberglass the penetration for reinforcing. At 11:30 San Juaquin County EHD inspector Paul Nso arrived on site for 91 secondary containment pipe inspection, secondary line set pressure at 5 psi then soaped the penetration on sump wall and the new 3"secondary clamp shell coupling. Inspector checked the pressure on gauge and waited for one hour then checked the gauge again and passed the test on 91 secondary pipe. Inspector wants JCG to test the interstitial on 91 STP and send the results for the pressure test no later the 30 days from the day we poured concrete. Removed the brine from 91 STP sump interstitial then performe the pressure, pressurized the interstitial at 2.5 psi for 30 minutes, sump interstitial passed the test. Backfill around the 91 STP sump and swept the work area, removed the pressure on the sump and pulled 10 inch of vacuum in 91 STP interstitial and let vacuum over night. Worked on repairing the leak on 91 secondary line, we created and alarm at 11:55am S 12: No vacuum alarm. When we removed the brine from the sump we created one alarm on the veeder root L: 9: 91 STP hydro sensor out alarm at 3:01 pm. Cleaned up and secure site. 10/29/20: Arrived on site and checked in with manager, opened up the 91 STP sump and checked the vacuum on sump interstitial, 10 inch of vacuum on interstitial hold on all night. Picked up material at Home Depot, drill concrete dowel, cut and set rebar, worked on 91 STP sump interstitial removed the vacuum gauge and poured brine back in the sump interstitial. Poured concrete, 91 secondary pipe had 15 inch of vacuum we removed the vacuum test gauge and connected the 1/4" hose to the smart sensor 12: 91 product secondary line, Veeder root went back to all functions normal. Had Pilot Manager check the 91 STP sump for liquid, debris and sensor returned to proper placement and locked, we told the manager about the 91 STP manway lid, all bolts are broken. Cleaned up. 10/30/20: Arrived on site and checked in with the manager, worked on cleaning up around the new concrete, painted the No parking sign and the yellow strip on new concrete and painted the concrete curve red next to the new concrete. Loaded up truck#103, we left 4 fence panels around the new concrete and 6 panels leaning on AST chain link fence, the rental fence are scheduled to pick up on Monday 11-2-2020 in the morning. Cleaned up then traveled to JCG yard. Product Description Order Order Quantity Uom Labor- Pilot Labor- (3) Man Crew-4 Days 1 ......................................................................................................................................................................................................................................................................................................................................................................................... Labor Project Management 4 .........................................................................................p............................................................................................................................................................................................................................................................................................ Labor- Pilot Permit Expeditor 4