|
ELECTRICAL PLAN NOTES ELECTRICAL GENERAL NOTES �►
<br /> ODUCT SMOKE DETECTOR AND RELAY FOR HVAC UNIT SUPPLY FAN SHUTDOWN SHALL O DISCONNECT SWITCH IS PROVIDED BY EQUIPMENT MANUFACTURER, INTEGRAL WITH A. ANY EXISTING CONDITIONS INDICATED IN THIS SET OF DRAWINGS ARE BASED ON
<br /> BE FURNISHED BY THE ELECTRICAL CONTRACTOR FOR INSTALLATION BY THE EQUIPMENT. PROVIDE CIRCUIT AND FINAL CONNECTION TO DISCONNECT SWITCH AS INFORMATION PROVIDED BY OTHERS AND POSSIBLE LIMITED FIELD VERIFICATION.
<br /> MECHANICAL CONTRACTOR. DUCT SMOKE DETECTOR SHALL BE SYSTEM SENSOR INDICATED. THE CONTRACTOR SHALL ADJUST FOR ACTUAL FIELD CONDITIONS AT NO
<br /> #4120 OR EQUAL. THE ELECTRICAL CONTRACTOR SHALL PROVIDE 120 VOLT WIRING Og WEATHERPROOF GFCI SERVICE RECEPTACLE IS PROVIDED BY EQUIPMENT ADDITIONAL EXPENSE TO THE OWNER. �
<br /> TO THE DUCT SMOKE DETECTOR AND CONNECT TO SPARE 20 AMP, 1 POLE CIRCUIT MANUFACTURER, INTEGRAL WITH EQUIPMENT. PROVIDE CIRCUIT
<br /> BREAKER WITH HANDLE LOCK-ON ACCESSORY. THE ELECTRICAL CONTRACTOR AND FINAL CONNECTION TO SERVICE RECEPTACLE AS INDICATED. B. THE CONTRACTOR SHALL VISIT THE PROJECT SITE, REVIEW EXISTING CONDITIONS
<br /> SHALL ALSO PROVIDE A SYSTEM SENSOR#RTS2-AOS, OR EQUAL, REMOTE TEST AGAINST THE CONTRACT DOCUMENTS,AND FAMILIARIZE HIMSELF WITH THE WORK
<br /> STATION/ MULTI-SIGNALING ACCESSORY. INSTALL MULTI-SIGNALING ACCESSORY IN O SEE LIGHTING PLAN FOR CONTINUATION OF EXHAUST FAN CONNECTION. PRIOR TO BIDDING AND START OF THE WORK. BY SIGNING THE CONTRACT,THE
<br /> CONTRACTOR ACKNOWLEDGES THE SITE VISIT HAS BEEN COMPLETED AND THE
<br /> A CONTINUOUSLY ATTENDED LOCATION,TO BE COORDINATED WITH THE AUTHORITY
<br /> 10 TRANSFORMER AND DISCONNECT SWITCH SHALL BE LOCATED IN THE BASEMENT EXISTING CONDITIONS ARE ACCEPTED.
<br /> HAVING JURISDICTION AND OWNER PRIOR TO ROUGH-IN. DUCT SMOKE DETECTORS LEVEL. COORDINATE WITH PROJECT MANAGER FOR FINAL LOCATION.
<br /> ASSOCIATED WITH HVAC UNITS THAT SHARE A COMMON AIR PLENUM SHALL BE C. THE CONTRACTOR IS RESPONSIBLE FOR DEMOLITION OF EXISTING EQUIPMENT,
<br /> INTERLOCKED WITH ONE ANOTHER SUCH THAT ACTIVATION OF ANY ONE OF THE DEVICES, LUMINAIRES, CONDUITS, SUPPORTS, HANGERS, ETC.THAT ARE NOT ©2017 STARBUCKS COFFEE COMPANY
<br /> ASSOCIATED DUCT SMOKE DETECTORS WILL SHUT DOWN SUPPLY FANS OF ALL SHOWN AND ARE REQUIRED TO BE REMOVED IN ORDER TO COMPLETE THE NEW
<br /> HVAC UNITS SHARING THE COMMON AIR PLENUM. ALL FINAL WIRING SHALL BE BY WORK.
<br /> THE ELECTRICAL CONTRACTOR. D. ELECTRICAL CIRCUITS THAT ARE TO BE REMOVED SHALL BE REMOVED IN THEIR STARBUCKS COFFEE
<br /> ENTIRETY. CONDUCTORS SHALL BE REMOVED FROM THE ITEM TO BE DEMOLISHED COMPANY
<br /> OPROVIDE FINAL CONNECTION TO SIGNAGE. COORDINATE LOCATION AND ALL TO THE SOURCE OVERCURRENT DEVICE. RACEWAYS WHICH ARE INSTALLED IN OR
<br /> REQUIREMENTS WITH SIGN CONTRACTOR PRIOR TO ROUGH-IN. PROVIDE AN BELOW FLOORS OR WITHIN WALLS MAY BE ABANDONED, BUT ALL OVERHEAD OR 2401 UTAH AVENUE SOUTH
<br /> APPROPRIATE LOCAL DISCONNECTING MEANS MOUNTED IN AN ACCESSIBLE, EXPOSED RACEWAYS SHALL BE REMOVED. EXPOSED RACEWAYS TO BE ABANDONED SEATTLE,WASHINGTON 98134
<br /> INCONSPICUOUS LOCATION THAT IS WITHIN SIGHT OF THE SIGN. EACH SIGN SHALL BE REMOVED AND SHALL BE CUT OR CHISELED AT LEAST 2" INTO THE WALL 318-1575
<br /> CIRCUIT SHALL HAVE A SEPARATE NEUTRAL AND SEPARATE EQUIPMENT GROUNDING OR FLOOR AND THE OPENING GROUTED SMOOTH. (206)
<br /> CONDUCTOR. E. MAINTAIN CONTINUITY OF EXISTING CIRCUITS AS REQUIRED TO PROVIDE POWER
<br /> THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> OPROVIDE FINAL CONNECTION TO AIR CURTAIN AND INTERLOCK WITH ASSOCIATED TO REMAINING EQUIPMENT, DEVICES,AND LUMINAIRES THAT ARE NOT BEING CONFIDENTIAL AND SHALL REMAIN THE SOLE
<br /> 3 DOOR AND DEVICES.VERIFY SPECIFICATION WITH STARBUCKS PROJECT MANAGER REMOVED. PROPERTY OF STARBUCKS CORPORATION,
<br /> PRIOR TO ROUGH-IN.THE CONTRACTOR SHALL NOT EXCEED THE MOCP AND PROVIDE F. ANY EXISTING FIRE ALARM SYSTEM SHALL REMAIN IN OPERATION THROUGHOUT WHICH IS THE OWNER OF THE COPYRIGHT IN
<br /> THE PROPER DISCONNECTING MEANS. CONSTRUCTION.AUTOMATIC SMOKE DETECTORS IN THE AREA OF CONSTRUCTION THIS WORK. THEY SHALL NOT BE
<br /> OPROVIDE POWER AND DATA DEVICES FOR FUTURE DIGITAL MENU BOARDS. SHALL BE DISCONNECTED AND TEMPORARILT REPLACED WITH HEAT DETECTORS WHEN REPRODUCED(IN WHOLE OR IN PART), SHARED
<br /> COORDINATE EXACT LOCATION WITH STARBUCKS PROJECT MANAGER PRIOR TO THE SPACE IS STAFFED BY THE CONTRACTOR IN ACCORDANCE WITH THE APPROVED WITH THIRD PARTIES OR USED IN ANY MANNER
<br /> FIRE SAFETY PROCEDURES OF THE OWNER AND THE LOCAL FIRE MARSHALL, BUT ON OTHER PROJECTS OR EXTENSIONS TO THIS
<br /> ROUGH-IN. SHALL BE REACTIVATED WHENEVER THE SPACE IS NOT OCCUPIED BY THE PROJECT WITHOUT THE PRIOR WRITTEN
<br /> OPLUGMOLD MOUNTED AT COMMUNITY TABLE.VERIFY EXACT HEIGHT AND MOUNTING CONTRACTOR.AUTOMATIC SMOKE DETECTORS SHALL BE PROTECTED FROM DUST AND CONSENT OF STARBUCKS CORPORATION.
<br /> LOCATION WITH OWNER PRIOR TO ROUGH-IN. DIRT ACCUMULATION BY REMOVING THE DEVICE FROM ITS BASE DURING THOSE THESE DRAWINGS AND SPECIFICATIONS ARE
<br /> TIMES WHEN THE SYSTEM IS ALLOWED TO BE OUT OF OPERATION.
<br /> OSTUB-UP LOCATION TO COMMUNITY TABLE. SEE 1-1104 FOR ADDITIONAL INFORMATION. INTENDED TO EXPRESS DESIGN INTENT FOR A
<br /> G. WHERE THE MECHANICAL DESIGN UTILIZES A PLENUM RETURN AIR CEILING PROTOTYPICAL STARBUCKS STORE(WHICH IS
<br /> DESIGN,ALL EQUIPMENT AND MATERIALS INSTALLED WITHIN THE PLENUM RETURN SUBJECT TO CHANGE AT ANYTIME)AND DO
<br /> CEILING MUST MEET THE FLAME SPREAD AND SMOKE DEVELOPED RATINGS OF 25/50 NOT REFLECT ACTUAL SITE CONDITIONS.
<br /> AND BE APPROVED FOR USE IN PLENUM RETURN CEILINGS. COORDINATE PLENUM NEITHER PARTY SHALL HAVE ANY OBLIGATION
<br /> CEILING LOCATIONS WITH THE MECHANICAL CONTRACTOR. LUMINAIRES THAT ARE NOR LIABILITY TO THE OTHER(EXCEPT STATED
<br /> MANUFACTURED WITH A METAL HOUSING MEET THIS REQUIREMENT AND ARE NOT ABOVE UNTIL A WRITTEN AGREEMENT IS
<br /> REQUIRED TO BE PLENUM RATED UNLESS INDICATED OTHERWISE. )
<br /> COORDINATE ALL DEVICE LOCATIONS AND CIRCUIT ROUTING WITHIN ANY MILLWORK FULLY EXECUTED BY BOTH PARTIES.
<br /> WITH MILLWORK VENDOR PRIOR TO ROUGH-IN.
<br /> H. COORDINATE ALL DEVICE LOCATIONS AND CIRCUIT ROUTING WITH ANY MILLWORK ARCHITECT OF RECORD
<br /> WITH MILLWORK VENDOR PRIOR TO ROUGH-IN. C11Cg afChlteCtUf6
<br /> I. COORDINATE THE CONNECTIONS OF ALL EQUIPMENT PROVIDED BY OTHERS WITH THE y
<br /> CONTRACTOR PROVIDING THE EQUIPMENT PRIOR TO ROUGH-IN. THIS INCLUDES,
<br /> AC-2 BUT IS NOT LIMITED TO, MECHANICAL EQUIPMENT, KITCHEN EQUIPMENT, L
<br /> ° AUDIOVISUAL EQUIPMENT, FIRE SUPPRESSION SYSTEM EQUIPMENT, FIRE ALARM
<br /> 3 EQUIPMENT, ETC. THE ELECTRICAL CONTRACTOR IS RESPONSIBLE TO PROVIDE U,
<br /> - - THE APPROPRIATE DISCONNECTING MEANS FOR AND TO MAKE THE FINAL
<br /> GFCI ___ ____ 10 D EQUIPMENT. THE ELECTRICAL CONTRACTOR IS 111 Pacifica, 18
<br /> _______ TO,ANY RE
<br /> 'fica,Suite 280,Irvine,CA 926
<br /> 17"` 8-37 ALSO RESPONSIBLE PROVIDE AN APPROPRIATE CORD AND PLUG FOR ANY P:949.553.1117 F:949.474.7056
<br /> I I 400/3 CORD-AND-PLUG CONNECTED EQUIPMENT THAT IS NOT EQUIPPED WITH AN INTEGRAL
<br /> 400A CORD AND PLUG.
<br /> FUSES ENGINEER STAMP
<br /> J. ITS THAT ARE TO BE ROUTED
<br /> SEE PANEL SCHEDULES FOR INFORMATION ON CIRCUITS o Q�Of ESS/ON
<br /> = THROUGH CONTACTORS OR RELAYS FOR CONTROL
<br /> Rly
<br /> 2 __ ���� ,10 �y SCtiti Fy
<br /> 28 TRANSFORMER Tl K. THE ELECTRICAL CONTRACTOR IS RESPONSIBLE FOR PRESERVING THE FIRE RATING
<br /> _______ ______ ___ ____. OF ANY FIRE-RATED CEILING ASSEMBLIES BY PROVIDING THE APPROPRIATE _ � m Z
<br /> 2 J ESTOP c�
<br /> n
<br /> 21 -110 1 - No. E14631
<br /> �� FIRE RATED LUMINAIRE TENTS AS MANUFACTURED BY TENANT OR NELSON FIR � r r^
<br /> 1719 2
<br /> W
<br /> E 10970 _________________________________________________ _________________________________________________________________________________________________________________________________________ ________ _ ____________ .__ _______________. ______________________________
<br /> OR BY BUILDING FIRE-RATED ENCLOSURES AROUND EACH LUMINAIRE THAT IS
<br /> 17 RECESSED INTO THE FIRE-RATED ASSEMBLY. COORDINATE FIRE-RATED CEILING
<br /> 2 GFCI TR I�P�
<br /> J
<br /> PANEL 'A' L. ALL EQUIPMENT, DEVICES,AND LUMINAIRES SHALL BE SUITABLE FOR THE 9TF
<br /> 26 — — ENVIRONMENT IN WHICH THEY ARE INSTALLED. EQUIPMENT MOUNTED OUTDOORS OF CA%-
<br /> x
<br /> SHALL BE NEMA 3R DEVICES MOUNTED IN DAMP OR WET LOCATIONS SHALL BE
<br /> . ,
<br /> E 11083 E 19729 E 15186 B-25 PANEL B WEATHERPROOF. RECEPTACLES RATED 15-OR 20-AMPS AND 120 VOLTS WHICH ARE Date. 03/24/2020
<br /> B-26,28 +84„ P-1 WITH A SUITABLE WEATHERPROOF OCOVE PLATE(WHILE-IN-USERTN WETD EQUIPPED
<br /> LOCATED IN DAMP OR WET U
<br /> HWH-1
<br /> 60/2 LOCATION
<br /> 9
<br /> F
<br /> N M. GS,TERMINALS, ETC. IN ELECTRICAL DISTRIBUTION EQUIPMENT SHALL BE
<br /> J
<br /> 9
<br /> J –91 �p LISTED FORA MINIMUM OF 75 DEGREE C CONDUCTORS. TERMINATIONS LISTED
<br /> 21 E 13682 +72 B13,15, F ON 60 DEGREE CONDUCTORS NO TED
<br /> __ E 101970 � (#8,#12,#12) J "F I„8
<br /> OR ONLY C C CT S ARE T PERMIT
<br /> 1 / ;, � B-2 8 10
<br /> 3
<br /> _-- _-- _- N. BRANCH CIRCUITS RATED AT 20 AMPS AT 120 VOLTS THAT ARE LONGER THAN 75
<br /> 1 / _
<br /> E 1362 ' / FEET SHALL BE#10 AWG MINIMUM TO OFFSET VOLTAGE DROP.
<br /> RTU-1 F RTU-3
<br /> D 13 ` RTU-2
<br /> O. LONGER THAN 150
<br /> FEET SHALL BE#8 AWG MINIMUM TO OFFSET VOLTAGE DROP.
<br /> BRANCH CIRCUITS RATED AT 20 AMPS AT 120 VOLTS THAT ARE
<br /> ------------------------------------------------------
<br /> 1
<br /> P 10874 +93n TYP ` I 1 I D ----- -------- ------------ P. BRANCH CIRCUITS RATED AT 20 AMPS AT 277 VOLTAS THAT ARE LONGER THAN 150 N
<br /> W
<br /> 4
<br /> B-2
<br /> �26"l15 ��������� ����������� FEES SHALL BE#10 AWG MINIMUM TO OFFSET VOLTAGE DROP.Q CONDUCTORS#10 AWG AND w
<br /> = �� � � � . CONDUCTORS#12 AWG AND SMALLER SHALL BE SOLID. COND >
<br /> 2°' +99"
<br /> B-22
<br /> / LARGER ARE PERMITED TO BE STRANDED Q Q
<br /> B-3�, / / +9 1 6 GFCI„ .,
<br /> J
<br /> 10 W/RE / L_ J � / � � � / � +44 w —
<br /> �# 5
<br /> w 06 � [ Z
<br /> 7
<br /> A 1
<br /> L — — J L_ — J _____ _________ _________ _________ _________ _________ _________ _________
<br /> / �#10 WIRE / 8
<br /> / � a Z —
<br /> / 7 Q
<br /> 8-14,16,18
<br /> 8 / 14 14 14 U — U
<br /> _ / A—50 W W
<br /> U � o
<br /> / o
<br /> � —7 A-2, O O r
<br /> #8 WIRE) �#8 WIRE) . /-�
<br /> ............... ... ... / C/)1
<br /> STORE #: 5470
<br /> -110
<br /> AC—1 B-35 # 052
<br /> /
<br /> PROJECT 03030
<br /> I CONCEPT:
<br /> CASEWORK C CORE
<br /> 3 10 20
<br /> ISSUE DATE: CHECKSET 2- -
<br /> R
<br /> PROGRAM M. DBREBIKA
<br /> /
<br /> /
<br /> DESIGNER: BREBIKA
<br /> STORE DES M D
<br /> 14LEED(DAP: N/A
<br /> 2 /
<br /> CHECKED BY: A. FELDMAN
<br /> MCG
<br /> _ MCG PROJEMANAGER: C. LEE
<br /> 14 MCG PROJ SPECIALIST: SPARK
<br /> 14
<br /> 16
<br /> --- Revision Schedule
<br /> SR _____ _ _ � �� By Description
<br /> Rev Date Des n
<br /> SR -
<br /> AC-3
<br /> � POWER AND
<br /> 2 B-24 SYSTEMS PLAN
<br /> ---- Schnackel SCALE:AS SHOWN
<br /> WER AND SYSTEMS PLAN � ®
<br /> Newyork a Omaha a�Mge1�a She a Hono1� SHEET N U M B ER:
<br /> af-s"lie: 1/4"= 1'-0" N 80x581-0963 wwwJwhm dwL00m
<br /> 80 South Lake Avenue, Suite 640 Pasadena, CA 91101 E-1 1 01
<br /> SE JOBQ: 181103
<br />
|