SU0014459 - Laserfiche WebLink

Home Browse Search

d. PARKING: Off-street parking shall be provided and comply with the following: 1. All parking spaces, driveways, and maneuvering areas shall be surfaced and permanently maintained with base material of appropriate depth and asphalt concrete or Portland cement concrete to provide a durable,dust free surface.Bumper guards shall be provided when necessary to protect adjacent structures or properties. (Development Title Section 9-1015.5[e]) 2. A minimum of 2 parking spaces shall be provided for the manure digester facility. (Development Title Section 9-1015.9) 3. Parking spaces for persons with disability shall be provided as required by Chapters 11 A and 11 B of the California Building Code. 4. Each parking stall shall be an unobstructed rectangle, minimum 9 feet wide and 20 feet long. (Development Title Section 9-1015.5[b]) e. ACCESS AND CIRCULATION: The following requirements apply and shall be shown on the Site Plan: 1. Access driveways shall have a width of no less than 25 feet for two-way aisles and 16 feet for one-way aisles, except that in no case shall driveways designated as fire department access be less than 20 feet wide. (Development Title Section 9-1015.5[h][1]) f. LIGHTING: Lighting shall be provided and comply with the following: 1. If the parking area is to be used at night, parking lot lighting shall be installed. (Development Title Section 9-1015.5[g]) 2. Any lighting shall be designed to confine direct rays to the premises. No spillover beyond the property lines shall be permitted except onto public thoroughfares, provided, however, that such light shall not cause a hazard to motorists. (Development Title Section 9-1015.5[g][4]) g. MITIGATION MONITORING REPORTING PLAN:A Mitigation Monitoring Reporting Plan (MMRP) dated February 23, 2022 is approved with this project. Mitigation measures contained in the MMRP shall be satisfied prior to issuance of any building permits. h. BUILDING CODE REQUIREMENTS: The following California Building Code (CBC) and San Joaquin County Ordinance requirements will be applicable to the proposed project. The following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: 1. A building permit for each separate structure or building is required. Submit plans, Specifications and supporting calculations, prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with the applicable California Building Standards Code in effect on the application date for the building permit(s). Plans for the different buildings or structures may be combined into a single set of construction documents. (Please visit https://www.sjgov.org/commdev for building permit checklist(s) and application forms. 2. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of the code. PA-2100209—Conditions of Approval 2