INSTALL_2022 - Laserfiche WebLink

Home Browse Search

secondary • Vacuum Sensing System Maximize protection with a vacuum monitored secondary containment . system . A Secondary Containment Vacuum Features and Benefits Facilitates periodic operability testing Sensing System for use with Veeder- Satisfy Requirements Leverage Existing Veeder=Root Systems Root's ATG Systems . The Secondary Certified to meet California's requirement for . Uses Srp as the vacuum source and works with Containment Vacuum Sensing (SCVS) secondary space monitoring for tanks and lines RedJacket and FE STPs as required by AB 2481 • Installs in the STP sump and connects to the System is designed to detect leaks in double- Satisfies the requirements for Class I Leak console via intrinsically safe wiring walled tanks and piping systems while Detection as defined by the European . Able to share wiring conduit with other Standard EN 13160-2intrinsically robes and helping to contain a release of product while 3rd P National Work Groupand LGI13 ��ROOt umsafe (15) p under vacuum. The system consists of: listed sensors including sump en line leak sensors • Interfaces to the Smart Sensor Interface with • Embedded Pressure Module Vacuum Sensors , connected to tank, Reduce Exposure to Risk Alarms when vacuum cannot be maintained Provides for positive shut down of pressurized sump or piping interstices or when replenish rate exceeds 85 liters per hour lines when required • A Submersible Turbine Pump (STP) , Simple installation, no need to mess with brine • The system alarms when liquid is detected in to provide a source of vacuum the secondary space • A Smart Sensor Interface with Embedded Pressure Module in a TLS-350 Operating Temperature Rating: Console Capability Monitoring System -25 degrees C to +70 degrees C The Vacuum Sensor is compatible with g Y the following consoles: Cable Length : Console The Vacuum Sensor is interfaced to Veeder- 8 feet TLS-350R/EMC w/BIR* Root's TLS-350 Monitoring System via TLS-350 Plus/EMC Enhanced* intrinsically safe wiring to provide system Sensor Dimensions : TLS-350/EMC* *Upgrade Note: The Vacuum Sensor System requires status, replenish rate, alarm, and diagnostic 5" high x 5" wide 2" deep the console to have version 24C software (or greater) information. along with an ECPU2 or ECPU w/ NVMEM 1 board. Standard Models Vacuum Sensor Kits are available in a variety Veeder- Root P/N Description 330020-467 4 Vacuum Sensor Kit' for steel tank of models: 330020-4689-4691-470471 4 Vacuum Sensor Kit' for fiberglass tanks (4',6',8',10) 330020-486 4 Vacuum Sensor Kit' for no tank • For monitoring double-walled piping 330020-472 3 Vacuum Sensor Kit* for steel tank 330020-4731-474s-4751-476 3 Vacuum Sensor Kit* for fiberglass tanks (4',6',8' ,1 o') and sump interstices 330020-485 3 Vacuum Sensor Kit' for no tank • For monitoring double-walled steel tank 330020-479 2 Vacuum Sensor Kit* for steel tank interstices (see back page) 330020-481s-4821-483$-484 2 Vacuum Sensor Kit' for fiberglass tanks (4',6',8',10') P g 330020-480 2 Vacuum Sensor Kit* for no tank • For double-walled fiberglass tanks 330020-495 1 Vacuum Sensor Kit* for no tank 857280-100 Vacuum Sensor for piping R sumps 857280-200 Vacuum Sensor for steel tanks These kits differ in the number of vacuum 857280-301 - 302 -303 -304 Vacuum Sensor for fiberglass tanks (4',6',8',10') sensors and the configuration of associated 330020-448 Mounting Kit liquid sensors. An inline kit mounted liquid 332217-001 Relief Valve Assembly 332250-001 Smart Sensor w/Embedded Pressure Sensor Module (7 Channe)** sensor is used for Vacuum Sensors monitoring piping and sumps. An external Accessories Part Description Quantity/Length Part Number 1/4" NPT Barbed Fittings 3 330020-487 liquid sensor (to be installed in the secondary 1 /4" NPT Barbed Fittings 15 330020-488 space at the bottom of the tank) is provided 1 /4" NPT Barbed Fittings 25 330020-489 Barbed Tee 1 576008-657 with one of the Vacuum Sensors in the steel Vacuum Hose 25' 25' 332310-001 and fiberglass tank kits to monitor the tank. Vacuum Hose 50' 50' 332310-002 Vacuum Hose 100' 100' 332310-003 3-Way Ball Valve 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Fitting 15 330020-497 IUs include mounting bracket, 6' of vacuum hose, relief valve assembly (d required) and the appropriate number of liquid sensors, 3-way ball vaFres, barbed fittings and hose damps so that each vacuum sensor can monitor a single lank, sump or gping interstim. " The Vacuum Sensing System requires one 7 channel Smart Sensor Interface veth Embedded Pressure Module, 8 channel Smart Sensor Modules (p/n 329356-004) can be used for Vacuum Sensors tight and above. For more information call : 1 - 888 -561 - 7942 VEEDER- ROOT