INSTALL_2001 - Laserfiche WebLink

Home Browse Search

Guide Specifications Short Form The contractor shall provide liquid tight containment chambers located under each product dispenser. Chamber shall be installed in accordance with each fuel dispenser as manufactured by Environ Products, Inc. Chamber manufacturers current installation instructions. shall house and permit access to the plumbing components located under Long Form Design: The sump shall be of such a design as to permit access to all Liquid Tightness: All containment chambers shall prevent outside surface associated fittings and piping directly underneath a product dispenser. The and ground water from coming in and prevent any leaking product frame of the sump shall be sized to fit the framework of the dispenser and origination within from escaping into the environment. permit dispenser anchoring directly into a concrete slab. Height Adjustability: All containment chambers shall be field height Product Compatibility: All components and accessories of the containment adjustable to accommodate different tank and piping burial depths. chambers shall be chemically compatible with the products to be distributed Anchoring & Stabilization: The dispenser containment chambers shall and with chemicals found naturally in the ground environment. provide a means of securing the above-ground dispenser unit, shear valve Corrosion Resistance: All components which come in contact with the and piping. ground environment shall be made of non-metallic material or protected by . Anchoring. The dispenser containment chamber shall provide a of such materials which prevent corrosion. a design that the base frame of the dispenser is mounted directly over the Structural Integrity: All components shall be designed and constructed of concrete slab and not cantilevered. materials strong enough for its intended use. The Containment Chambers . Shear Valve Stabilization: The dispenser containment chamber shall shall not collapse,crack or break due to ground movement or from backfill and provide a metal framework including one or more fully adjustable stabilizer high ground water pressures. bars to securely attach a shear valve in such a manner that the valve will Pipe&Conduit Entries: All containment chambers shall be fitted with pipe properly activate in the event of a dispenser knock-over. This assemble and conduit entry seals which are semi-absorbent to ground movement and should meet the minimum testing requirements of the California Shear Valve sufficiently flexible enough to permit angled entries up to 30 degrees without Stabilization Test. leaking under liquid head pressures of up to six feet (1.8m). No metallic components shall be exposed to the ground. Warranty Environ warrants that all products manufactured will be of good materials and THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, E workmanship and free from defects for a period of ten(10)years. Environ also EXPRESSED OR IMPLIED,AND THERE ARE NO WARRANTIES WHICH warrants that all components are compatible with gasoline, gasohol, ethanol, EXTEND BEYOND THE FACE HEREOF. methanol,jet fuel,avgas,kerosene,diesel fuels and motor oil. Avgas and Jet Fuel applications require the use of steel couplings and fittings. Environ war- The remedy of repair or replacement provided for herein is buyer's exclusive rants that at the time of shipment the products will be merchantable and free remedy. ENVIRON SHALL NOT BE LIABLE FOR ANY INCIDENTAL,CON- from defects in materials and workmanship. Environ's sole obligation to Buyer SEQUENTIAL OR SPECIAL DAMAGES OR FOR ANY LOSS,DAMAGE OR under this warranty is the repair or replacement, at Environ's option, of any EXPENSE ARISING FROM THE SALE, USE OR INSTALLATION OF THE products or parts thereof which, under normal use,have proven defective in PRODUCTS OR FROM ANY OTHER CAUSE WHATSOEVER, WHETHER material or workmanship. This warranty does not cover ordinary wear and BASED ON WARRANTY (EXPRESSED OR IMPLIED) OR OTHERWISE tear,abuse,misuse,overloading,alteration,or products which have not been BASED ON CONTRACT,OR ON TORT,AND REGARDLESS OF ANY ADVISE operated,installed or maintained in accordance with Environ's written instruc- OR REPRESENTATIONS NOT IN WRITING THAT MAY HAVE BEEN REN- tions. When a warranty claim arises,Buyer must contact Environ to arrange DERED BY ENVIRON CONCERNING THE SALE,USE OR INSTALLATION OF return shipment. If the defect comes under the terms of this limited warranty, the products will be repaired or replaced and returned. THE PRODUCTS. U.S.Patent 5263794,5271518,5297896 Other U.S.and Worldwide Patents Pending Copyright m 1995 Environ Products Inc. Environ Products Inc • 252 Welsh Pool Road • Lionville,Pennsylvania 19341 Tel(610)594-0297 • General Fax(610)594-9042 • Marketing Fax(610)594-9675