INSTALL_2001 - Laserfiche WebLink

Home Browse Search

.,:.. 9 u0 VARIABLE SPEED OPTION: ' r CONSTANT FLOW: Power Supply Options: Provides constant flow for up to 8 nozzles at a 60 Hz Applications:Available in li�3,3/4,1 1/2 and 11/2 hp high pressure models in 208-230 volt, predetermined flow rate set at installation. single phase,and 200 volt 3 phase. 50 Hz Applications:Available in 3/4,11/2 and 11/2 hp high pressure models in 220-240 volt,single phase,380-415 volt 3 phase, and 200 volt 3 phase. 50/60 Hz Applications:2 hp Variable Speed Option for use with Variable Frequency Controller only. F" Input 200-250 volt,50 or 60 Hz,single or 3 phase.Controller provides 3 phase power to 2 hp variable speed pump motor. Pump Motor: Centrifugal type,directly interchangeable with most competitive makes. 7Constantw means faster fueling times Maximum liquid viscosity: e daily peak business periods. 70 SSU at 60°F.(15.5°C). _ Thermally protected:Automatic thermal overload FEATU MEETS EPA "SPITBACN" CONTROL: turns motor off at approximately 205°F(95°C) and resets on at approx.115'F(45'C). From January 1,1996, Liquid Compatibility: the EPA requires a Standard units compatible with fuel mixtures maximum flow rate per containing up to 15%ethanol or methanol with nozzle of 10 GPM.The gasoline and 20%MTBE,20%ETBE,or STP-VS2 meets this 17%TAME with gasoline,and diesel fuels. requirement with a one Alcohol/Gasoline models(designated with AG in model number)are compatible in fuel mixtures time investment.To containing any combination of ethanol or comply,the maximum methanol and gasoline and 20%MTBE, flow rate for one nozzle 20%ETBE,or 1756 TAME with gasoline,and is adjusted to a diesel fuels. maximum of 10 GPM. Check Valve: The STP-VS2 will provide a constant flow rate for 2 3/4"(70mm)diameter constructed of aluminum and steel with fluorocarbon seal. up to 8 nozzles operating simultaneously. (Alodined aluminum for AG models) Optional Adjustable Check Valve available for electronic line leak detectors that require EPA mandated"Spitback„control is met by the specific pressure settings. STP-VS2 with a simple adjustment during Pressure Relief Valve: installation.Invest in"Spitback"control one Standard valve is set to relieve static line pressure time with the STP-VS2. at 35-50 PSI(2.38 to 3.4 bar),reseals above 20 PSI(1.36 bar).Other settings available. Air Eliminator: INTELLIGENCE: Returns air to tank with one way check valve to The Variable Frequency Controller has prevent back flow. continuous running diagnostics and displays Seal Elastomers: system conditions on the controller. _ All wetted seals on standard units use Viton®. Dry Running L—W__ Alcohol/Gasoline(AG)models use Viton GFLT Low Incoming Voltage S hon•rocarbon seals. Locked Rotor in Pump •Syphon Primer in venturi type,capable of Open Circuit between 26"Hg(66cm)vacuum. Controller and Motor Syphon Check Valve is machined aluminum, Short Circuit between ' _ field repairable. Controller and Motor Variable Frequency Controller Size: Thermal Overload in Controller •Enclosure size is 51/8"x 10"x 81/a" Controller capacitors failing (130mm x 254mm x 210mm). Approvals and/or Listings: UL,CSA,BASEEFA,TUV,SAA,BKI,INMETRO, Immediate,easily understood display of TILS,KHK,FTZU,others pending. system conditions reduces service time. Quality Certification: •FE Petro is an ISO 9001 Certified Manufacturer.