Laserfiche WebLink
Installation <br /> A. Adhering the Optional "Telephone" Label on the VE-9x12-0 or VE-9x20-0 <br /> 1. Clean the recessed area on the door cover with isopropol alcohol. <br /> 2. Make sure the outside edges of the "Telephone" label are not warped upward (re-form if necessary). Remove <br /> backing paper, then firmly press label in recessed area on the front cover. <br /> B. Using the VE-9x12 to mount the K-190OW-2 or K-150OP-W <br /> I. Mount the VE-9x12 to the wall, or surface desired, using the (4) corner mounting holes. <br /> 2. Run the conduit and wiring as appropriate. <br /> 3. Attach adapter panel #1 using the (4) included 8-32 x 318 black cap screws. <br /> 4. Attach a standard RJ11 wall plate (Radio Shack part# 279-451 or equivalent). <br /> 5. Attach the K-190OW-2 or K-150OP-W to the RJ11 wall plate. <br /> Adapter Panel #1 VE-9x12 Box <br /> K-190OW-2 or K-150OP-W (included) (included) <br /> (not included) RJ-11 Wall Plate <br /> (not included) On- <br /> (4)8-32 x 318 black cap 0� <br /> screws(included)------ <br /> C. Using the VE-9x12 to mount the E-20113, E-1600A, E-1600-03113, E-1600-45A, E-1600-60A or W-2000A <br /> 1. Mount the VE-9x12 to the wall, or surface Adapter Panel#1 VE-9x12 Box <br /> desired, using the (A) corner mounting holes. (included) (included) <br /> 2. Run the conduit and wiring as appropriate. <br /> E-1600A Shown <br /> 3. Attach adapter panel #1 using the (4) includ- (not included) <br /> ed 8-32 x 318 black cap screws. <br /> 4. Attach the Viking product directly to the <br /> adapter using the installation instructions pro- — > <br /> vided in the product's Technical Practice. <br /> (4)8-32 x 318 black cap l= <br /> screws (Included)----- <br /> D. Using the VE-9x12 to mount the E-10, E-30, E-60, E-1600-20A, W-1000 or W-3000 <br /> 1. Mount the VE-9x12 to the wall, or surface Adapter Panel#2 VE-9x12 Box <br /> desired, using the (4) corner mounting holes. (included) (included) <br /> 2. Run the conduit and wiring as appropriate. W-3000 Shown <br /> 3. Attach adapter panel 42 using the (4) includ- (not included) <br /> ed 8-32 x 318 black cap screws.. d <br /> 4. Attach the Viking product directly to the <br /> adapter using the installation instructions <br /> provided in the product's Technical Practice. <br /> (4)6-32 flathead screws ----- <br /> (Included with W-3000) <br /> (4)B-32 x 318 black cap <br /> screws(Included) ----- <br />