Laserfiche WebLink
INSPECT AND VERIFY THE FINAL SHUTOFF LEVEL <br /> DIRECT FILL <br /> NOTE: When you perform this procedure, do not remove the OPV assembly from the tank. <br /> DEFINITIONS <br /> "All Distance from the upper drop tube to the <br /> s bottom of the underground storage tank. <br /> •"g"95%tank volume-obtained from the tank <br /> chart provided by the tank manufacturer.To find <br /> the 95%tank level on the tank chart, multiply <br /> the actual tank capacity by 0.95.Then on the <br /> tank chart,find the level measurement that <br /> ■ <br /> matches the calculated volume the closest. <br /> •'Z" Distance from the upper drop tube to the top <br /> edge of the upper drop tube adapter. <br /> "Z" 4.5" Distance from 95% shutt-off to the top of <br /> upper drop tube adapter. <br /> MEASURING"Z"WITHOUT REMOVING <br /> THE FILL ADAPTER <br /> (114mm) <br /> _ T <br /> I(" Tom. <br /> "A" <br /> rr 07 <br /> 14-) <br /> R,. "Z.. <br /> 1'r7C"Distance from the tap of the fill adapter to the <br /> top edge of the upper drop tube adapter. <br /> Y° Distance from the top of the fill adapter to the <br /> top edge of the drop tube flange. <br /> 17 <br />