INSTALL_2022 - Laserfiche WebLink

Home Browse Search

e I VEEDER ROOT GaugeTLS-350R Automatic Tank Communication Compartment Modules(limit 4 per console unless otherwise noted) Memory Expansion Modules Description Part# Description Part# Memory Expansion Module for RS-232 Satellite Module 329362-003 ECPU2 board,2 MEG(req'd for ISD or 333760-203 Maintenance Tracker) RS-232 Serial Satellite Module 329362-004 System Compatibilities Guide RS-232 Single Port Module,DB25,w/Maintenance Tracker ID Resistor 329362-005 TLS-350R TLS-35OR Communications Dual Port RS-232/RS-485 Interface Module 330586-001 PC-35OR &Memory (only used in Comm.Slots 3&4) Feature/Console TLS-350PLUS Expansion Modules Dual-Port Remote Display Module RS-232 330586-011 PC-350PLUS (Continued) Dual-Port Remote Display Module Satellite RS-485(Amoco) 330586-015 CONSOLE DESIGN Dual-Port RS-485 Module/Serial Satellite(Shell) 330586-016 Modular/Expandable Features • Fixed Features Dual-Port RS-232/RS-485 Module DB9 with Maintenance Tracker ID 330586-017 Integral Printer Optional resistor(only used in Comm.Slots 3&4) INVENTORY CONTROL SiteFax"Module 300/1200/2400-Baud Fax/Modem Interface(Max 330149-002 Business Inventory Reconciliation •' 3/console,phone cable included) Variance Analysis • Ethernet TCP/IP Communications Module 330020-425 Fuel Manager Optional Specifications Complete Inventory Reports • Programmable Auto Report Times • Operating +32 to+118°F(0 to+45°C) Inventory Increase Report • Temperature IN-TANK LEAK TEST Storage Temperature -40 to+162°F(-40 to+74°C) 0.1 GPH Tank Tightness Testing • Installation Location NEMA 4 or indoors 0.2 GPH Tank Tightness Testing • Relative Humidity 0-90i(non-condensing) Continuous Statistical Leak Optional Detection External Dimensions 19.75'x 11.25"x 7.1875°(50.165cm x 28.575cm x 18.26cm) Selectable Test Rates • Construction 16GA(0.060 in/0.1524 cm)powder coated steel Programmable Automatic Test • Schedules PASS,FAIL,or INVALID Indicators • Console Power AC Power Wiring—Wires carrying 120 or 240 VAC from power panel to the console LINE LEAK DETECTION Wiring Requirements should be#14 AWG(or larger)wire for line,neutral&chassis ground(3);and 4 sq. Integral Line Leak Defector Optional mm,rated for at least 90C for barrier ground. Programmable Line Test Features Optional INTERSTITIAL/SUMP LEAK SENSING 1. Wire Type—Shielded cable required regardless of conduit material or application. Tank Annulus • It must be rated less than 100 picofarad per ft manufactured with a suitable Sump • material such as Carol C2534 or Belden 88760,8760,or 8770. Dispenser Pan • 2. Wire Length—Maximum 1,000ft(304.8m)to meet intrinsic safety requirements. Mag Sump Probe&Sensor Improper system operation could result for runs over 1,000ft(304.8m). • to Console Wiring 3. Wire Gauges—Color coded—shielded cable used in all installations.Wires Sensor Location Identifiers • Requirements should be#14-#18 AWG stranded copper wire and installed as Class 2 circuits. VAPOR WELL MONITORING As an alternate method when approved by the local authority having jurisdiction, Hydrocarbon Vapor Detection #22 AWG wire such as 88761 may be suitable with the following requirements: • wire run is less than 750ft(228.6m);Capacitance does not exceed 100 pF/ft; High Water Level Alarm • Inductance does not exceed 0.2 uH/ft. GROUNDWATER MONITORING Hydrocarbon Liquid Detection • System Power Universal AC power supply:100 to 249VAC,50/60Hz,2A max. Low Water Alarm • Requirements SECONDARY CONTAINMENT VACUUM SENSING Display 20 character liquid crystal display SYSTEM(SCVS) Specifications Vacuum Sensors • Custom User Access Front Panel Display control through user specific log-in AIR VAPOR MONITORING Approvals UL cUL,ATEX,IECEx In-Station Diagnostics(ISD) Optional Carbon Canister Vapor Polisher Optional Third Party http//www nwglde org/evals/veeder root zf html Vapor Pressure Sensor Optional Evaluations Vapor Flowmeter Optional Product Installation https7//www.yeede[.com/us/technica1-document-Iibrary *Standard in TLS-350R,Upgradeable in TLS-35OPWS Guide