Laserfiche WebLink
Technical Data Sheet Orenco <br />SYSTEMS <br />PF-Series Submersible Effluent Pumps: <br />1-Phase, 60-Hz, 4-inch (100-mm) <br />Applications Features/Specifications <br />Our PF-Series 4-inch (100-mm) Submersible Effluent Pumps are <br />designed to transport screened effluent (with low TSS counts) from <br />septic tanks or dosing tanks. These pumps are constructed of light- <br />weight, corrosion-resistant stainless steel and engineered plastics, and <br />are field-serviceable and repairable with common tools. They're also <br />CSA- and (JL-certified to U.S. and Canadian safety standards for efflu- <br />ent pumps. <br />PF-Series pumps are used in a variety of applications, including pressur- <br />ized drainfields, packed-bed filters, mounds, aerobic units, effluent irri- <br />gation, liquid-only (effluent) sewers, wetlands, lagoons, and more. These <br />pumps are designed to be used with a Biotube6 pump vault or after a <br />secondary treatment system. <br />Franklin liquid <br />end <br />Franklin <br />Super Stainless <br />motor <br />To specify this pump for your installation, require the following: <br />Minimum 24-hour run-dry capability (liquid end) with no deterioration <br />in pump life or performance* <br />1/8-inch (3-mm) bypass orifice to ensure flow recirculation for motor <br />cooling and to prevent air bind <br />Liquid-end repair kits available for better long-term cost of ownership <br />TRI-SEArm floating impeller design on 10, 20, and 30 gpm (0.6, 1.3, <br />and 1.9 Usec) models; floating stack design on 50 and 75 gpm (3.2 <br />and 4.7 Usec) models <br />Franklin Electric Super Stainless motor, rated for continuous use and <br />frequent cycling <br />Type SCOW 600-V motor cable (model PF751512 uses 14 AWG, <br />SJOOW, 300-V cord) <br />Not applicable for 5-hp (3.73 Ir14) models <br />Standard Models <br />See specifications chart on page 2 for a list of standard pumps. For a <br />complete list of available pumps, call Orenco. <br />Product Code Diagram <br />PF <br />TCLK = ClickTight*. compatible <br />Cord length, ft (m):t <br />Blank = 10(3) 20 = 20 (6) <br />30 = 30 (9) 50 = 50 0 5) <br />Check valve: <br />Blank = no internal check valve <br /> <br />CV = Internal check salver <br />Voltage, nameplate: <br /> <br />1 = 115* 2 = 230 <br />Frequency: <br />1 = single-phase 60 Hz <br />Horsepower (kV: <br />05 = 10 hp (0.37) 07 = 34 hp (0.56) <br />10 = 1 hp (0.75) <br /> 15= 114 hp(1.11) <br />20 = 2 hp (1.50) 30 = 3 hp (2.24) <br />50 = 5 hp (3.73) <br />Nominal flow, gpm (Uses): <br /> <br />10 = 10(0.6) 20 = 20(1.3) <br /> <br />30 = 30(1.9) 50 -- 50(3.2) <br />75 = 75(4.7) <br />Pump, PF Series <br />11-hp 10.37 kVe only <br />Available for 10 gpm (0.6 Used, 1/2 hp 10.37 kW) <br />'Note: 20-ft cords are available only for pumps through 114 hp <br />Discharge connection <br />Suction connection <br />e4® <br />C US <br />LR80980 <br />LR2053896 <br />Ak Powered by <br />cp Franklin Electric <br />Orenco Systems° • 800-348-9843 • +1 541-459-4449 • www.orenco.com NTD-PU-PF-1 <br />Rev. 10 01/21 <br />Page 1 of 4