Laserfiche WebLink
Refer to your local Georg Fischer Sales office for the most <br />current warranty statement_ <br />All warranty and non -warranty repairs being returned must <br />include a fully completed Service Form and goods must be <br />returned to your local GF Sales office or distributor. <br />Product returned without a Service Form may not be <br />warranty replaced or repaired. <br />Signet products with limited shelf -life (e.g. pH, ORP, chlorine <br />electrodes, calibration solutions; e.g. pH buffers, turbidity <br />standards or other solutions) are warranted out of box but not <br />warranted against any damage, due to process or application <br />failures (e.g. high temperature, chemical poisoning, dry -out) or <br />mishandling (e.g. broken glass, damaged membrane, freezing <br />and/or extreme temperatures). <br />Thank you for purchasing the Signet line of Georg Fischer <br />measurement products. <br />If you would like to register your product(s), you can now <br />register online in one of the following ways: <br />• Visit our website www.gfsignet.com. <br />Under Service and Support click on <br />Product Registration Form <br />• If this is a pdf manual (digital copy), click here <br />The retaining nuts of Magmeters are not designed for <br />prolonged contact with aggressive substances. Strong acids, <br />caustic substances -and solvents or their vapor may lead -to <br />failure of the retaining nut, ejection of the sensor and loss <br />of the process fluid with possibly serious consequences, <br />such as damage to equipment and serious personal injury. <br />Retaining nuts that may have been in contact with such <br />substances, e.g. due to leakage or spilling, must be replaced. <br />�-- 94 mm —0 <br />(3.7 in.) <br />79.25 mr <br />(3.12 in.) <br />Pipe Range: <br />1/2 to 4 in. -XO = 58 mm (2.3 in.) _XO ~ <br />5 to 8 in. -X1 = 91 mm (3.6 in.) -X1 <br />10 to 36 in. -X2 = 167 mm (6.6 in.) _X2 <br />X = Sensor Body P, T, or V <br />2 2551 Blind Magmeter <br />Depressurize and vent system prior to installation or removal. <br />Confirm chemical compatibility before use. <br />Do not exceed maximum temperature/pressure specifications. <br />Wear safety goggles or face shield during installation/service. <br />Do not alter product construction. <br />Disconnect power before attempting any service or wiring. <br />Caution / Warning / Danger <br />PI Indicates a potential hazard. Failure to follow all warnings <br />i may lead to equipment damage, injury, or death <br />Electrostatic Discharge (ESD) / Electrocution Danger <br />AY' <br />Alerts user to risk of potential damage to product by ESD, <br />and/or risk of potential of injury or death via electrocution. i <br />iPersonal Protective Equipment (PPE) <br />f I_ Always utilize the most appropriate PPE t4, -ring <br />5 l j installation and service of Signet products. <br />_ i <br />�. i Pressurized System Warning <br />4;: I Sensor may be under pressure, take caution to vent <br />_ I system prior to installation or removal. Failure to do so <br />may result in equipment damage and/or serious injury. <br />Hand Tighten Only <br />Overtightening may permanently damage product threads <br />and lead to failure of the retaining nut. <br />Not Use Tools <br />Use of tool(s) may damage product beyond repair and <br />potentially void product warranty. <br />Operating Temperature/Pressure <br />(psi) (bar) <br />180 12.4 <br />tSu 11.0 <br />150 10.3 <br />1=v a_7 <br />1:10 9.0 <br />120 8.3 <br />90 6.2 <br />60 4.1 <br />s0' 3 <br />101 2.R <br />30 2.1 <br />_u 1 <br />;0 <br />0 L <br />`C -20 <br />T -4 <br />0 20 40 60 80 100 120 <br />32 68 104 140 176 212 248 <br />+GF+ <br />