|
Basic Personal Protection
<br /> ®Head protection from overhead hazards—Wear hardhat or"bump cap"as appropriate for hazard.
<br /> ®Hand protection—Wear protective work gloves appropriate for the hazard and work tasks.
<br /> ®Eye protection—Wear safety glasses(with side shield or wrap around,either clear or shaded for sun protection),or other appropriate eye protection.
<br /> ®Foot protection,rough terrain—Wear work boots/shoes with hard toes,ankle support,puncture resistance,traction,as appropriate for conditions.
<br /> ❑Hearing protection—use earplugs or earmuffs(or both)as appropriate for conditions;at a minimum where noise levels exceed 85 dBA.
<br /> M Protective clothing/nuisance dust mask—For general protection against dust,dirt,oily residues,unsanitary conditions,as needed.
<br /> ❑Other personal safety gear required for the task(s)covered in this THA is described above in Site-Specific Notes&Clarifications
<br /> Geosyntec Procedures: HS 109-Hearing Conservation,HS 112-Respiratory Protection,HS 113-Personal Protective Equipment
<br /> D.2. SPECIAL DRIVING/TRAFFIC/TRANSPORTATION HAZARDS ® Applicable ❑ Not Applicable, Not Anticipated
<br /> Site-Specific Notes&Clarifications: A Pedestrian Control Plan will be used for temporary sidewalk closure and work activities related to installation of the SVPs.
<br /> SPECIAL DRIVING HAZARDS ❑For off-road driving,do not exceed capability of vehicle,beware of wet conditions,keep speed low,avoid
<br /> i Off-Road Driving or use of non- unsafe orientation on slopes.
<br /> typical vehicle,heavy vehicle,van, ❑UN/AN-specific procedures for training,use roll-bar or helmet,operate per manufacturer's instructions.
<br /> UTV/AN € ❑Special Skills Required for Vehicle type For vehicles requiring special skills(such as windowless van,heavy
<br /> Hazards:Worker injury due to work vehicle,utility vehicle,similar)ensure operator is provided training and/or has appropriate operator
<br /> vehicle collision,rollover skills through experience.
<br /> Geosyntec Procedure(s):HS-510-All Terrain Vehicles
<br /> ® ROADWAY TRAFFIC HAZARDS ® Prepare Management of Traffic(MOT)Plan(address location hazards/client and regulatory requirements).
<br /> Where the worksite is located ❑Wear DOT-approved reflective vests where exposed to traffic hazards.
<br /> in/near vehicle thoroughfare(road, ❑Where possible,park vehicles as protective shield from oncoming traffic.
<br /> highway,parking lot,etc.). ❑Configure work area and support vehicles to minimize worker exposure to traffic hazards.
<br /> Hazards:Worker injury from being ❑Use DOT signal devices and/or signage to re-route vehicles around work area,site entrances/exits.
<br /> struck by vehicle traveling in
<br /> thoroughfare. ❑Use DOT-trained flaggers or police detail where appropriate or required.
<br /> Geosyntec Procedure(s):HS-517-Traffic Safety
<br /> ; TOWING/HAULING LOADS € ❑Ensure load within vehicle is firmly secured(rope,straps,load configuration)to prevent shifting during travel.
<br /> Hazards:Vehicle accident,occupant ❑Slings,chains,strap,rope and related equipment used for towing,hauling,load-securing shall be appropriate
<br /> injury from shifting load,unsafe for use and used in a manner as to prevent an unsafe condition.
<br /> equipment,un roadworthiness of ❑For trailer use,verify tow-hitch components are compatible,hitch/safety chains secure,signal/braking lights
<br /> trailer. operational,rear view mirrors effective,tires inflated to proper pressure and tread acceptable.
<br /> RAILROAD HAZARD ❑Coordinate with rail company or on-site host facility and implement required safety and security measures.
<br /> Hazard:Worker injury from being ❑Site workers to receive safety training for railroad work.
<br /> struck by train in R.R.right-of-way Geosyntec Procedure(s):HS-305-Rail Operations
<br /> El
<br /> ; TRANSPORTATION BY WATER ❑See D.3.,"Water Hazards."
<br /> Geosyntec Procedure(s):HS-312-Water Transportation Safety
<br /> ❑ AIRPORT HAZARDS ❑Coordinate safety requirements with airport personnel and implement required safety measures.
<br /> Worker injury when working ❑Site workers to receive safety training for airport work.
<br /> on/near airport runway,or use of
<br /> helicopter,light aircraft Geosyntec Procedure(s):HS-310-Helicopter Safety,HS 311-General Aviation(Small Aircraft)Safety
<br /> TRAFFIC/VEHICLE HAZARDS ❑See D.8.,"Construction,Heavy Equipment,Lift Equipment"
<br /> RELATED TO HEAVY EQUIPMENT,
<br /> CONSTRUCTION SITE ACTIVITIES
<br /> D.3. WATER HAZARDS(Working Over/Near Water,Ash Ponds,Quicksand) ❑ Applicable ® Not Applicable, Not Anticipated
<br /> Site-Specific Notes&Clarifications:
<br /> WATER HAZARDS [ General water-safety measures for all work near water:
<br /> [ Work/travel in watercraft or on equipment over [ ❑Wear regulatory-approved personal flotation device(PFD)where drowning hazard is present.
<br /> i water or over coal ash impoundment/pond: ❑Bring emergency rescue and/or signaling equipment(ring buoy and rope,reaching device,flares)
<br /> ❑Workboat,barge ❑For fall protection over water,see D.4."Fall Hazards."
<br /> El Water transportation ❑For electrical hazards associated with water/wet locations,see D.10."Electrical Work Tasks."
<br /> ❑Hazardous currents(river,tidal/riptide) Boating-specific:
<br /> El Ash pond ❑Use fuel safety practices,fire extinguisher present in boat.
<br /> ❑Towing,trailer,roadway ❑Develop/follow float plan,monitor weather,navigate/communicate as planned.
<br /> ❑Other—describe above ❑Confirm navigation/communication equipment operable before heading onto water.
<br /> Geosyntec° Project/Task Name:TR0712/GSH OxyChem-Stockton SVP Installation
<br /> THA Date:06/25/2022 Page 4
<br /> consultants
<br />
|