WORK PLANS - Laserfiche WebLink

Home Browse Search

A6.1INTERIOR FINISH SCHEDULES AS NOTED MATERIALS SPECIFICATIONS (NOT ALL MATERIALS IN SCHEDULE ARE USED)CERAMIC TILE1.TILE: INTERCERAMICT-1 -- 16x24 CERAMIC, HABITAT DURABODY, SMOKE- PATTERN: 1/2 RUNNING BOND IN RESTROOM / STACKED BOND IN HALLWAY REF: INTERIOR ELEVATIONS- GROUT LINE: 3/16"- THINSET: VERSABOND GRAY THINSET, 50/LB BAG- GROUT: POLYBLEND SANDED GROUT, #183 CHATEAU, 25/LB BAGT-2 -- 7x36 CERAMIC, SUNWOOD PRO DURABODY, LEGEND BEIGE- PATTERN: 1/3 OFFSET RUNNING BOND- GROUNT LINE: 3/16"- THINSET: VERSABOND GRAY THINSET, 50/LB BAG- GROUT: CBP POLYBLEND SANDED GROUT, #183 CHATEAU, 25/LB BAGT-3 -- (ALTERNATE FLOORING) 16x24 CERAMIC, BOSTON, LIGHT GRAY-(ORDERED BY SQUARE FOOT)- PATTERN: 1/3 RUNNING BOND- GROUT LINE: 3/16"- THINSET: VERSABOND GRAY THINSET, 50/LB BAG- GROUT: POLYBLEND SANDED GROUT, #540 TRUFFLE, 25/LB BAGT-5 -- 3x6 COLOR BODY CERAMIC, IC BRITES, ULTRA WHITE- PATTERN: RUNNING BOND- GROUT LINE: 1/8"- THINSET: VERSABOND WHITE THINSET, 50/LB BAG- GROUT: POLYBLEND DRY GROUT UNSANDED, WHITE, 25/LB BAG- PROVIDE BULLNOSE TILE EDGE AS SPECIFIED ON ELEVATIONS.2.CLEANING PRODUCTS FILA-DETERDEK 5 LITER (INITIAL CLEANING BY GC)3.FLOOR LEVELING COMPOUND: HYDROMENT/ BOSTIK SL150, SELF LEVELING BOSTIKUNIVERSAL PRIMER (USED WITH SL 150)ALL PRE-PACKAGED THIN SET MORTAR IS FORMULATED TO MEET THE INDUSTRYREQUIREMENTS OF ANSI AND TCNA TO PROPERLY PERFORM IN SPECIFIC TYPES OFINSTALLATION. BLENDING OF STANDARD THIN SET MORTAR WITH RAPID SETTING MORTARWILL AFFECT SHRINKAGE AND ULTIMATE STRENGTH OF THE MORTAR. CUSTOM BUILDINGPRODUCTS WILL NOT WARRANT JOBS WHERE THIN SET MORTARS HAVE BEEN MODIFIEDWITH UNAUTHORIZED MATERIALS; WHICH INCLUDES BLEND WITH OTHER CUSTOM BUILDINGPRODUCTS THIN SET MORTARS. TILES TO BE BACK BUTTEREDVINYL TILE FLOORING (ALTERNATE FLOORING)1.VCT-1 -- TYPE 1 - VINYL COMPOSITION TILE ARMSTRONG "EXCELON"- COLOR: #51858 SANDRIFT WHITE2.INSTALLATION: VCT IS HIGHLY POROUS. THIS POROSITY IS NECESSARY TO ACHIEVECOMPLETE CURING. ONLY DRY MOPPING W/ CLEAR WATER IS ACCEPTABLE FOR THEFIRST FOUR DAYS AFTER INSTALLATION.3.SEALING: TO SEAL AND PROTECT, A MINIMUM OF 5-7 WAX COATS ARE REQUIRED OVER48 HOURS.4.CLEANING: ONLY NEUTRAL FLOOR CLEANERS W/ A DILUTED PH OF 6.5 -7.5 WILL NOTDAMAGE THE FINISH OR COMPOSITION OF THE TILE.SEALED CONCRETE SLAB"SALT & PEPPER" FINISH. REFERENCE SPECIFICATION SECTIONS 033000 CAST-IN-PLACECONCRETE AND 033536 POLISHED CONCRETE FLOOR FINISH, BOTH PROVIDED BY 7-ELEVENAND DATED 02-26-2018.CEILING1.CEILING TILE: A-1 -- USG VINYL FACED LAY IN- 2' X 2' #7056G KAPOK- FIRE CLASSIFICATION: TYPE A- FLAME SPREAD: 25- SMOKE DENSITY: 50 A-2 -- USG CLEAN ROOM (AS REQUIRED BY AHJ)- 2' X 2' #56099- FIRE CLASSIFICATION: TYPE A- FLAME SPREAD: 25- SMOKE DENSITY: 502.GRID: WHITE USG, SUSPENSION SYSTEM - DXL26BASE1.VINYL BASE: " WITH 3/8" RADIUSB-1 -- ROPPE - 4" & 6"; COLOR "193 BLACK BROWN" (USE ONLY 6" IF REQUIRED BY LOCAL CODE)2.TILE BASE: B-2 -- SCHLUTER - AHKA (FOR USE WITH CONCRETE FLOOR)- 3/8" COVE BASE- 1X6 CORNER- 1X6 OUTSIDE CORNER- AHKA 125 AE FOR T-1 AND T-2, AHKA 80 AE FOR T-5B-3 -- SCHLUTER - AHK (FOR USE WITH TILE FLOOR, WITH T-1 AND T-2 WALLS)- 3/8" COVE BASE- 1X6 CORNER- 1X6 OUTSIDE CORNER- AHK 1S 125 AE B-4 -- IC BRITES / ULTRA WHITE (FOR USE WITH TILE FLOOR, WITH T-5 WALLS)- 6X6 - 3/8" COVE BASE- 1X6 CORNER- 1X6 OUTSIDE CORNER3.GALVANIZED COVE BASE: WITH 3/8" RADIUSB-5 -- SMOOTH PEBBLE TEXTURE 4" COVE BASE AROUND INTERIOR PERIMETER OF WALK-IN COOLER UNITSNOTE:1.VERIFY WITH AHJ SCHLUTER COVE TRANSITION IS ALLOWED, USE CERAMIC COVE BASEAS REQUIRED BY AHJ (TO BE APPROVED BY 7-ELEVEN).2.VERIFY WITH AHJ VINYL BASE (B-1) IS ALLOWED, USE ALT BASE AS REQUIRED BY AHJ.RETAIL INFORMATION SYSTEM (RIS) BACKBOARD1.BACKBOARD SHALL BE BY U-TECK, MODEL 501082J-FRGCONTACT: DEBRA WOLFETEL. (800) 542-7011 REFERENCE SHEET A5.2, DETAIL 5 FOR LOCATION.METAL STUDS1.CLARKDIETRICH METAL FRAMINGICC# - ESR 1166PIAPMO# - ES-0189WALL COVERING1.FRP WALL PANELSFRP-1 -- WALL PANELS- MANUFACTURER: MARLITE- COLOR: P-100 (WHITE)- FINISH: SMOOTH GLOSS, PEBBLE FINISH- FIRE CLASSIFICATION:TYPE C- FLAME SPREAD: <200- SMOKE DENSITY: <450- LIGHT RV: 83.0%- NOTE: APPLY WITH MARLITE C-375 CONSTRUCTION ADHESIVEMOLDING AT ALL INSIDE CORNERS, AND "J" MOLDING WHERE WALL PANEL TERMINATES.ALL MOLDING SHALL BE FULL HEIGHT OF WALL FROM TOP OF WALL BASE2.WALK-IN COOLER UNIT WALLS:INTERIOR: SMOOTH PEBBLE TEXTURE GALVANIZED SKINEXTERIOR: T-5 TO 9'-4" THEN PAINTED GYPSUM BOARD ABOVE. (SEE INTERIORELEVATIONS FOR LOCATION OF WALL TILES T-5)CORNER GUARDS1.CORNER GUARDS: CG-1 -- - GENERAL: USED WITH FRP-1- MANUFACTURER: MARLITE- MODEL: 'FRP' CORNER GUARDS AND MOLDING- SIZE:1-1/2" X 1-1/2" X 120"- COLOR P-100 (WHITE)- PROVIDE FULL HEIGHT CORNER GUARDS AND "T" MOLDING- AT ALL OUTSIDE CORNERS AND JOINTS. TRIM "T" MOLDING AND CORNER GUARDS FLUSH AT TOP OF WALL BASE.- APPLIED WITH TITEBOND ADVANCED POLYMER FRP ADHESIVE CG-2 - - GENERAL: PROVIDED BY GC- MANUFACTURER: SCHLUTER- MODEL: RONDEC- FINISH: SATIN ANODIZED ALUMINUM, RO 125 AE- SIZE: 1/2"- INSTALLED PER MANUFACTURERS RECOMMENDATIONS- 1/2" SIZE FOR T-1/T-2 CORNERS ONLY. GC TO COORDINATE CORNER SPEC FOR OTHER WALL FINISH CONDITIONS.WALL TILE EDGE1.INSTALLED PER MANUFACTURERS RECOMMENDATIONS2.TILE EDGE: TE-1 -- - GENERAL: PROVIDED BY GC (USED WITH T-5)- MANUFACTURER: SCHLUTER- MODEL: SCHIENE E 80 EB- FINISH: BRUSHED STAINLESS STEEL 304- SIZE: 5/16" DEEP; 118" HIGH TE-2 -- - GENERAL: PROVIDED BY GC (USED WITH T-5 AT VAULT MAN DOOR)- MANUFACTURER: SCHLUTER- MODEL: SCHIENE STEP V/SS 60 EB II- FINISH: BRUSHED STAINLESS STEEL 304- SIZE: 1/2" DEEP, 118" HIGHTE-3 -- - GENERAL: PROVIDED BY GC (USED FOR T-2/T-5 WALL TRANSITION)- MANUFACTURER: SCHLUTER- MODEL: SCHIENE E 110 EB- FINISH: BRUSHED STAINLESS STEEL 304 - SIZE 7/16" DEEP; 118" HIGHTRANSITION STRIP (USED WITH ALTERNATE FLOORING)1.CERAMIC TILE TO DOOR THRESHOLDS SCHLUTER SYSTEMS, AEVT100B20. 8 LF/PCORDER FROM INTERCERAMIC2.CERAMIC TILE TO FINISHED CONCRETE OR VCT SCHLUTER SYSTEMS, AEU 100. 8LF/PCORDER FROM INTERCERAMIC3.CERAMIC TILE TO CERAMIC TILE SCHLUTER SYSTEMS, DECO, E 90 D ORDER FROMINTERCERAMIC4.VINYL TILE TO FINISHED CONCRETE NGP, 8132 AL TRANSITION, 6' ORDER FROM HOMEDEPOTMAPES CANOPY AWNING1.MAPES ARCHITECTURAL CANOPIES2.ROLL FORMED LUMISHADE ALUMINUM CANOPY WITH INTERNAL DRAINAGE. INSTALL PERMANUFACTURERS SPECIFICATIONSFINISH: BRONZE BAKED ENAMEL3.CONTACT:MAPES CANOPIES, LLC7748 NORTH 56TH STREETLINCOLN, NE 68514PHONE: 888-273-1132WEBSITE: MAPES.COM/CANOPIENICHIHA FIBER CEMENT PANELS1.NICHIHA (FIBER CEMENT)2.INSTALLING CONTRACTOR MUST BE NICHIHA TRAINED3.WARRANTY INFO (50 YEARS)4.PRIOR TO BIDDING, CONSTRUCTION PROJECT MANAGER TO CONTACT NICHIHA, ATTN.JAMES WUESTE.5.NICHIHA APPORVED CONTRACTOR NAMES AND ORDERING INFO CAN BE PROVIDED BYCONTACTING NICHIHA AT(770)805-9466ATTENTION: JAMES WUESTEJWUESTE@NICHIHA.COM OR WWW.NICHIHA.COMROOFING1.DURO-LAST ROOFING, INC. APPROVED CONTRACTOR NAMES CAN BE PROVIDED BYCALLING DURO-LAST ROOFING, INC. - JIM MILLER AT (800) 248-0280 OR BY EMAIL ATJMILLER@DURO-LAST.COM.2.INSTALL A WHITE 40 MIL SINGLE-PLY MEMBRANE ROOFING SYSTEM THAT IS FABRICATEDOF A 18X14 WEFT INSERTED LOW-SHRINK, ANTI-WICKING POLYESTER FABRIC AND HAS ATHERMOPLASTIC MATERIAL LAMINATED TO BOTH SIDES AS MANUFACTURED BYDURO-LAST ROOFING, INC.3.ON ALL PARAPET LOCATIONS, WRAP PARAPET WITH NEW PRE-MANUFACTUREDPARAPET FLASHINGS BY DURO-LAST ROOFING AND TERMINATE ON EXTERIOR OF WALL.INSTALL NEW 2-PIECE SNAP ON COMPRESSION METAL EDGE, COLOR TO BE CHOSEN BYTHE OWNER AS MANUFACTURED BY EXCEPTIONAL METALS, INC. WHEN INSULATION TOBE ADDED USE THE NEW DURO-GUARD POLYISOCYANURATE INSULATION.4.FURNISH AND INSTALL NEW 2'-6" X 5'-0" SAFETY STRIPE, FULL SKIRT WALK PADS (ITEMNUMBER 1086) AROUND ALL SERVICEABLE ROOFTOP UNITS. DURO-LAST ROOF TRAC IIIPADS MUST BE INSTALLED BY WELDING THE 3 INCH SKIRTS COMPLETELY TO THE DECKMEMBRANE WITH A FULL 1-1/2" WELD TO PREVENT THE WALK PADS FROM DISLODGING.5.INSTALL THE MEMBRANE SYSTEM PER ALL LOCAL, STATE, AND FEDERAL CODES ANDREGULATIONS.6.ROOFING WARRANTY: 7-ELEVEN, INC. REQUIRES THAT THE ROOF HAVE DURO-LAST,INC.'S STANDARD WRITTEN 15- YEAR NDL WARRANTY.ROOF ACCESS1.EXTERIOR:(PROTOTYPICAL) GENERAL CONTRACTOR SHALL SELECT ONE OF THE THREE OPTIONS FOR A LADDER PORT FOR ROOF ACCESS BASED ON EXISTING CONDITIONS WHEN INTERIOR ROOF ACCESS IS NOT REQUIRED.1. LP TYPE 1 - FOR USE WITH FLAT WALL WITH OR WITHOUT PARAPET.2. LP TYPE 2 - FOR USE WHEN GUTTER OR OTHER ITEM IS ATTACHED TO THE OUTSIDE OF THE WALL.3. LP TYPE 3 - FOR USE WHEN THERE IS AN OBSTRUCTION (IE CORNICE, ETC) ON THE OUTSIDE OF THE WALL. CONTACT MICHELE ORAS AT LADDERPORT PHONE: 1-800-770-8851 OR 1-248-437-7100 (DIRECT) EMAIL: MICHELE@LADDERPORT.COM2.INTERIOR: ROOF HATCH: (OPTIONAL) 30" X 36" PREASSEMBLED SINGLE-LEAF INSULATED PAINT-BOND ROOF SCUTTLE EQUAL TO BILCO TYPE S ROOF HATCH. PROVIDE INTERIOR PADLOCK; GIVE KEYS TO CONSTRUCTION PROJECT MANAGER. ROOF HATCH GRAB BAR AVAILABLE THROUGH LADDERPORT SHALL BE INSTALLED. CONTACT MICHELE ORAS AT LADDERPORT PHONE: 1-800-770-8851 OR 1-248-437-7100 (DIRECT) EMAIL: MICHELE@LADDERPORT.COM3M SUN CONTROL WINDOW FILMSCONTACT:SHAWN CABRAL @ ACCENT DISTRIBUTING(941) 922-5268 (OFFICE) (941) 350-7585 (CELL)SCABRAL@ACCENTDISTRIBUTING.COM (EMAIL)1.FILM: 3M PRESTIGE 70 SOLAR FILM2.SOLAR FILM FOR STOREFRONT GLASS IN STORES WITH EAST, SOUTH AND WEST FACINGORIENTATIONS NOT BLOCKED BY EXISTING BUILDINGS. DO NOT INSTALL ONSTOREFRONT DOORS.3.INSTALL AT INTERIOR OF GLASS FULL HEIGHT AND PRIOR TO INSTALLATION OF ALLOTHER SPECIFIED FILMS AND DECALS.4.CLEAN WITH NON-ABRASIVE COMMON COMMERCIAL CLEANING SOLUTIONS.5.DO NOT PLACE AND REMOVE DECALS ON FILM.WINDOW FILMFROSTED WINDOW FILM (FILLER PANEL)TWO FILM INSTALLATION: FILMS TO BE INSTALLED ON THE INTERIORFIRST FILM: "3M - SILVER P18" UV REFLECTIVE FILMSECOND FILM: "3M - 3635-20B" BLOCKOUTREFERENCE SHEET EF-1 FOR LOCATION AS REQUIREDROLL-A-SHADE WINDOW GLARE PROTECTION1.INSIDE MOUNT IS STANDARD. OUTSIDE MOUNT ONLY IF INSIDE MOUNT IS DISRUPTED BYSIGNAGE, ETC.2.FABRIC WILL BE MERMET 7510 CHARCOAL COCOA 10% WITH BRONZE 3" TOP FASCIA ANDSTAINLESS STEEL CHAIN - BRONZE CHILD SAFETY TENSION DEVICE.3.ROLL-A-SHADE TECHS WILL MEASURE AND INSTALL.CONTACT: JENEVIE ABOUBAKARE TEL. (951) 245-5077 X141 Jenevie.Aboubarkare@RollAShade.comTOILET PAPER DISPENSERB-2892 SURFACE MOUNTED TWIN JUMBO ROLL TOILET TISSUE DISPENSERMUELLER GATES (COR-6)1.GATES SHALL BE BY MUELLER DOOR CO. INC.CONTACT: SUZANNE MILLERTEL. (800) 981-20402.INSTALL BOLLARDS FOR GATES PER GATE MANUFACTURERS INSTRUCTIONS.3.G.C. TO VERIFY AND CONFIRM GATE BOLLARD HEIGHTS FROM GRADE, CENTER TOCENTER DIMENSIONS AND BOLLARD OUTSIDE DIAMETER AND COMMUNICATEDIMENSIONS TO MUELLER FOR FABRICATION OF GATES.4.ALLOW 14 BUSINESS DAYS AFTER SUBMITTAL OF CONFIRMED BOLLARD DIMENSIONSFOR FABRICATION AND DELIVERY OF GATES.COUNTERTOPS1. AT POINT OF SALE LOCATIONS- WILSONART COSMIC STRANDZ- MATTE FINISH 4941K-602. AT COFFEE BAR LOCATION- SILESTONE ALPINA WHITE3. AT BEVERAGE BAR AND FRONT COUNTER HOT FOOD SECTION- STAINLESS STEELMATERIALMANUF.-COLORN0.FRP-1MARLITE 'FRP' P-100SMOOTH GLOSS, PEBBLE FINISH - WHITEINTERIOR MATERIALS SCHEDULE (NOT ALL MATERIALS IN SCHEDULE ARE USED)MATERIALMANUF.-COLORN0.INTERIOR MATERIALS SCHEDULE (CONT) (NOT ALL MATERIALS IN SCHEDULE ARE USED)T-116x24 CERAMIC TILEINTERCERAMIC - SMOKET-27x36 CERAMIC TILEINTERCERAMIC - LEGEND BEIGET-316x24 CERAMIC TILEINTERCERAMIC - LIGHT GRAYT-53x6 CERAMIC TILEINTERCERAMIC- IC BRITES / ULTRA WHITEG-1GYP BOARDB-1VINYL BASE4" ROPPE-BLACK / BROWNB-2SCHLUTER - DILEX - AHKAB-3SCHLUTER - DILEX - AHKB-4INTERCERAMIC -IC BRITES / ULTRA WHITETILE BASETILE BASETILE BASEA-1LAY INUSG - 2' X 2' VINYL FACEDA-2LAY INUSG - 2' X 2' CLEAN ROOMCG-1CORNER GUARDMARLITE - P-100 (WHITE)CG-2CORNER GUARDSCHLUTER - ROUNDEC - SATIN ANODIZEDALUMINUMTE-1TILE EDGESCHLUTER - EB BRUSH SS REF: SPECSSC-1SEALED CONCRETEGRIND, SEAL & POLISH CONCRETE -SALT & PEPPER FINISHUSGMATERIALMANUF.-COLORN0.N-1N-2FIBER CEMENT PANELFIBER CEMENT PANELMR-1MEMBRANE ROOFINGDUROLAST - WHITENICHIHA - SHALE BROWNNICHIHA - ALEXANDRIA RED BUFFP-3EXTERIOR HM DOORS,FRAMES, TRASHENCLOSURE GATE,GRAVEL GUARDS,AND LIGHT POLESSHERWIN WILLIAMS -SEAL SKIN SW 7675C-1PREFINISHEDALUMINUM CANOPYMAPES LUMISHADE CANOPY -BRONZE BAKED ENAMEL W/ REARGUTTER CONNECTIONSP-6EXTERIOR BOLLARDSSHERWIN WILLIAMS - SEAL SKIN SW 7675S-1ALUMINUMSTOREFRONT GLAZINGKAWNEER - 451T VGEXTERIOR MATERIALS SCHEDULE (NOT ALL MATERIALS IN SCHEDULE ARE USED)SC-2SEALED CONCRETEGRIND & SEAL CONCRETESC-3SEALED CONCRETESEAL CONCRETETE-2TILE EDGESCHLUTER - EB BRUSH SS REF: SPECSVCT-1VINYL TILEARMSTRONG - SANDRIFT WHITETE-3TILE EDGESCHLUTER - EB BRUSH SS REF: SPECSROOMNUMBERROOM NAME COMMENTS101MERCHANDISEROOM FINISH SCHEDULE ALTERNATE - CERAMIC TILE (T-3) ALTERNATE - VINYL COMPOSITION TILE (VCT-1) SEALED CONCRETE (SC-1) 4" FLEXIBLE COVE BASE (B-1) 3 8" SCHLUTER - COVE BASE (B-2) ALTERNATE - 3 8" SCHLLUTER COVE BASE (B-3) 6" CERAMIC COVER BASE (B-4) PAINTED GYP 3/4" PLYWOOD FRP WALL COVERING (FRP-1) CERAMIC TILE (T-2) CERAMIC TILE (T-5) 2'x2' LAY-IN ACOUSTICAL TILE (A-1) SMOOTH FINISH PAINTED GYP. BD. EXPOSED STRUCTURE CEILING HEIGHT NONE102SALES103OFFICE104BACK ROOM105UNISEX106UNISEX107ELECTRICALXXXFLOORSBASEWALLSCEILING CORNER GUARD (CG-1) CORNER GUARD (CG-2) TILE EDGE (TE-1)XXXXXXXXXXXXXXXXXXXXXX9'-4"10'-0"8'-0"8'-0"10'-6"NOTE: REF INTERIOR ELEVATIONS FOR WALL FINISH LOCATION TILE EDGE (TE-2) SEALED CONCRETE (SC-2) SEALED CONCRETE (SC-3)XXXXXX CERAMIC TILE (T-1)XXXXXXX TILE EDGE (TE-3)X6" NSF MTL COVE BASE - BY MF'R PRE-FAB FINISH PRE-FAB FINISH PRE-FAB FINISH110COOLER VAULTXXPRE-FAB FINISHXXXAPPLICATIONCOLORPAINT DESCRIPTIONEXPOSED WALLS ABOVE 9'-4"(SALES AREA) & CEILINGPEARLY WHITESOLO SEMI-GLOSS NONBLOCKING ENAMEL, A76W51#P-4DOOR & FRAME FOR MANAGER'S OFFICE.PORPOISEPRO INDUSTRIALPRE-CATALYZED EPOXY,K46W00151P-5MANAGER'S OFFICE WALLS AND CEILING,BACKROOM CEILING, TOTE ROOM WALLS ANDCEILINGS, AND RESTROOM CEILINGSPEARLY WHITESOLO SEMI-GLOSS NONBLOCKING ENAMEL, A76W51P-8SW 7047SW 7009SW 7009SHERWINWILLIAMS #DTM BONDINGPRIMER B66A50SELF PRIMING ONDRYWALLREPAINTPRIMERPROCRYL METALPRIMER B66W310PROMAR 200 ZEROVOC WALL PRIMERNEWCONSTRUCTIONPRIMERFOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XJURISDICTIONALEXCEPTIONSREMARKSTWO COATS ON BARE DRYWALLSAND, CLEAN, DRY, AND DULLALKYD AND GLOSSY SURFACESELF PRIMING ONDRYWALLPROCRYL METALPRIMER B66W310TWO COATS ON BARE DRYWALLAPPLICATIONCOLORPAINT DESCRIPTION#SHERWINWILLIAMS #REPAINTPRIMERNEWCONSTRUCTIONPRIMERJURISDICTIONALEXCEPTIONSREMARKSBULKHEAD AT SALESGECKOPRO INDUSTRIALPRE-CATALYZED EPOXY,K46W00151P-7SW 6719FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XSAND, CLEAN, DRY, AND DULLALKYD AND GLOSSY SURFACEDTM BONDINGPRIMER B66A50PROCRYL METALPRIMER B66W310DOCKHAZE GRAYARMORSEAL HSPOLYURETHANEP-11AMORSEAL 1000HSREDUCED 1PT PERGALREQUIRES MIXING OF PART A&BBEFORE APPLICATION. FOLLOWALL MIXING INSTRUCTIONSHIGH SOLIDS POLYURETHANE100 WITH A PRIME WITH A PRIMECOAT OF MACROPXY 646-100CLEAN DRY & DULLPRIMER USUALLYNOT REQUIREDB65A220 &B65V220PARKING LOT TRAFFIC MARKINGWHITEPROPARK PREMIUMWATERBASED TRAFFIC PAINTP-12B97WD2434PARKING LOT TRAFFIC MARKINGYELLOWPROPARK PREMIUMWATERBASED TRAFFIC PAINTP-13B97YD2467PARKING LOT TRAFFIC MARKINGREDPROPARK PREMIUMWATERBASED TRAFFIC PAINTP-14B97RD2012PARKING LOT TRAFFIC MARKINGBLUEPROPARK PREMIUMWATERBASED TRAFFIC PAINTP-15B97LD2022PARKING LOT TRAFFIC MARKINGBLACKPROPARK PREMIUMWATERBASED TRAFFIC PAINTP-16B97BD2021UNDERSIDE OF GAS CANOPYDECK WHITESHERCRYL HPA SEMI-GLOSS,B66W351P-17EXTRA WHITE,SW 7006DTM BONDINGPRIMER, B66A50DTM BONDINGPRIMER, B66A50FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XYARD LIGHT POLESSEAL SKINP-21SW7675FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XUSE B66N310 OVER BARE METAL,B66A50 OVER SLICK PREVIOUSLYPAINTED SURFACESSHERCRYL HPA SEMI-GLOSS,B66T354DTM BONDINGPRIMER, B66A50VENT PIPEEXTRA WHITEP-22SW 7006FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XDTM BONDINGPRIMER, B66A50SHERCRYL HPA SEMI-GLOSS,B66W351PROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310VENT RACKDO NOT PAINTREGULAR GAS FILL LIDEXTRA WHITEP-23SW 7006FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XSHERCRYL HPA SEMI-GLOSS,B66W351PROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310FIBRELITE LIDS SHOULD NOT BEPAINTEDREGULAR GAS MANHOLE CROSSTRICORN BLACKP-24SW 6258FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310SHERCRYL HPA SEMI-GLOSS,B66T354MID GRADE GAS FILL LIDSAFETY BLUEP-25B71T454FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310SHERCRYL HPA SEMI-GLOSS,B66T354MID GRADE GAS MANHOLE CROSSP-26FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310EXTRA WHITEB71W45XSHERCRYL HPA SEMI-GLOSS,B66W351PREMIUM GAS FILL LIDP-27FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310SAFETY REDB71T454SHERCRYL HPA GLOSS,B66R300PREMIUM GAS MANHOLE CROSSP-28FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310EXTRA WHITEB71W45XSHERCRYL HPA SEMI-GLOSS,B66W351DIESEL FILL LIDP-29FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310SAFETY YELLOWB71W45XSHERCRYL HPA GLOSS,B66R300KEROSENE FILL LIDP-30FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310APIOLIVE/BROWNB71T454E-85 FILL LIDP-32FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310APIOLIVE/BROWNB71T454SHERCRYL HPA SEMI-GLOSS,B66T354SHERCRYL HPA SEMI-GLOSS,B66T354VAPOR RECOVERY MANHOLE LIDP-33FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310SAFETY ORANGEB71T454SHERCRYL HPA SEMI-GLOSS,B66T354ALL OTHER MANHOLESP-34FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XPROCRYL METALPRIMER B66W310PROCRYL METALPRIMER B66W310SHERCRYL HPA SEMI-GLOSS,B66T354TRICORN BLACKSW 6258INTERIOR BUILDING PAINTING SCHEDULE (NOT ALL MATERIALS IN SCHEDULE ARE USED)EXTERIOR BUILDING PAINTING SCHEDULE (NOT ALL MATERIALS IN SCHEDULE ARE USED)DOORS & FRAMES; INTERIOR FACE OF THEEXIT DOOR & FRAME.PORPOISEPRO INDUSTRIALPRE-CATALYZED EPOXY,K46W00151P-35SW 7047DTM BONDINGPRIMER B66A50PROCRYL METALPRIMER B66W310FOR SCAQMD -PROINDUSTRIAL ZERO VOCSEMI-GLOSS, B666W60XSAND, CLEAN, DRY, AND DULLALKYD AND GLOSSY SURFACEALL PAINT IS GC PROVIDED. CONTACT A SHERWIN WILLIAMS STORE OR 1-888-621-6622 OR www.mys-w.com.7-ELEVEN PARENT JOB CODE IS 8329. CONTACT PAT BUSCH 214-587-3057 / pat.t.busch@sherwin.com OR KEVIN BEHM 216-566-1558 / kevin.c.behm@sherwin.com3883 Ruffin Road Suite B San Diego, CA 92123 p: 714/560/8200 f: 714/560/8211 www.tait.com Since 1964 Los Angeles Anaheim Ontario Sacramento San Diego Boise Dallas Denver Seattle ©"TAIT & ASSOCIATES" 2020 ALL RIGHTS RESERVED Job#: Scale: Date: Drawn By: Checked By: Rev. #Date DescriptionSHEET:7-ELEVEN, INC. 3200 HACKBERRY, IRVING, TEXAS 75063 SE1237 7-ELEVEN 1046249 1110 N. MAIN ST MANTECA, CA 95336 TICOFALCC 1 9 0 9 1L 11 / 21EXPIRESETSTAFOIA NR SNI C E EDCHRAIETA EN FR JR.EK ALLPNSI