COCLH0WR1 - Laserfiche WebLink

Home Browse Search

EMSL Analytical, Inc. 464 McCormick Street San Leandro, CA 94577 Tel/Fax: (510) 895-3675 / (510) 895-3680 http://www.EMSL.com / sanleandrolab@emsl.com EMSL Order: 092209173 Customer ID: STCK78 Customer PO: 107.22 Project ID: Analyst(s) Jose Madrid (13) Cecilia Yu, Laboratory Manager Stacy Trinh Le (12) or Other Approved Signatory EMSL maintains liability limited to cost of analysis. Interpretation and use of test results are the responsibility of the client. This report relates only to the samples reported above, and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. The report reflects the samples as received. Results are generated from the field sampling data (sampling volumes and areas, locations, etc.) provided by the client on the Chain of Custody. Samples are within quality control criteria and met method specifications unless otherwise noted. The above analyses were performed in general compliance with Appendix E to Subpart E of 40 CFR (previously EPA 600/M4-82-020 "Interim Method") but augmented with procedures outlined in the 1993 ("final") version of the method. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Estimation of uncertainty is available on request. Samples analyzed by EMSL Analytical, Inc San Leandro, CA NVLAP Lab Code 101048-3, WA C884 ( Initial report from: 05/05/2022 11:15:30 ASB_PLM_0008_0001 -1.78 Printed: 5/5/2022 11:15 AM Page 3 of 3