Laserfiche WebLink
3. GraRhical Disnlays <br />followingThe data shall be prepared <br />formats (e.g., bar graphs, line graphs, area or plan maps, <br />isopleth plots, cross-sectional plots or transects, three <br />timensional • _f <br />Indicateb. boundaries of s • area,and area <br />where more data are required; <br />C. Display geographical extent of contamination; <br />d. Illustrate changes in concentration in relation to <br />distances from the source, time, depth or other <br />parameters,* and <br />e. Indicate features affecting intramedia, transport <br />and show potential receptors. <br />RCRA Facility Investigation: <br />The Permittee shall follow the procedures described in <br />this section when conducting investigations tof characterize <br />the facility (environmental Setting); define the source <br />(Source Characterization); define the degree and extent of <br />release of hazardous constituents (Contamination <br />Characterization) and identify actual or potential <br />receptors. <br />The investigation shall result in data of adequate <br />technical content and quality to support the development and <br />evaluation of th Corrective Action Plan if necessary. The <br />information contained in a RCRA Part B permit application <br />and/or RCRA Section 3019 Exposure information Report may be <br />referenced as appropriate. <br />The scope of all sampling and analyses shall be <br />conducted in accordance with the Sampling and Analysis Plan. <br />All sampling locations shall be documented in a log and <br />identified on a detailed site map. <br />A. Environmental Settin <br />PermitteeThe shall collectsupplement <br />and/or verify Part B information on - environmental <br />setting at the facility. The Permittee shall characterize <br />the following as they relate to identified sources, <br />pathways, and areas of releases of hazardous constituents <br />from Solid Waste Management •._..._ <br />® 5 <br />