Laserfiche WebLink
2. To datenvikw ioww tuba distance hVin tank <br /> bottom to bomm of cut <br /> 5ubrcroct valve length (w)from dlswnce to tank <br /> bonorn(B) <br /> } M= <br /> Cast lug <br /> Note, Lower vube clearance must meet tank mane- In 7154 <br /> facmrer rept dr;etnents and all ARJ, local,state,and na- body <br /> tional codes. Typical clearance isabotrt 4'. If lower Floatdirwivn <br /> tube clearance is not met valve must be removed wid <br /> adju5te+d to meet these requiremenim <br /> 3. To det+ertttine kir tube disU*m kern tank <br /> batemn 9*trop of CLA: <br /> Sutnrac't valvQ length(U)Born distance to taoic <br /> bottarrr(8) <br /> view into dw tubs from above <br /> Nobe: Lower tube distance from tank hottom to top <br /> of cut rnust meet all AW,local,state.and nat(ona( <br /> codes, F or reference per 40 Cf R 63 subpart CCCCCC! <br /> NESHAP the lower tube can be no more than W from <br /> the bottom of the tank, If lower tube distance is not <br /> met valvae must be removed and adjusted to meet these <br /> requlremenK <br /> 4. To daternsins float alignment: <br /> Looking into upper tube(see figure)the float should be <br /> aligned along the length of the tank_ If Haat is not <br /> aligned omperlyad)ustments need to be made. <br /> 21 <br />