Laserfiche WebLink
WALTON <br /> ENGINEERING, INC. <br /> P.0.Box 1025 9163721888 PH <br /> 3900 Commerce Drive 9163731172 FAX <br /> West Sacramento, CA 95691-1025 CA Contractor's License#617238 <br /> Customer Job Location Work Order# 170597 <br /> Vixxo 7-Eleven#2369-19976 Scheduled Date: 10/25/2023 <br /> 7000 E Shea Blvd,Suite H1970 1399 N.Main Street Scheduled Time: 9:00:OOAM <br /> Scottsdale,AZ 85254-6137 Contact: <br /> GVR Site ID 235090 <br /> Manteca,CA 95336 Customer PO#: 1-5721157992 <br /> Phone: 2092393252 Facility: W31155-017 <br /> Station#: 19976 <br /> Contract# <br /> Work To Be Performed: Call type: P2 Service Call ** <br /> Tank-Remove 87 nipple <br /> Work Performed: <br /> 10/16/23 Performed Job Safety Analysis and uploaded JSA form to Walton Work Orders. <br /> 10/16/23 Remove 87 nipple. <br /> 87 nipple needs to be removed to inspect drop tube.Attached swivel adaptor tool to 87 swivel adaptor and spill bucket spins when turning <br /> due to nipple rusted in place.Tried penetrating oil and let sit but no change and chain wrench has no effect either.87 Adaptor,nipple and <br /> spill bucket will need to be removed all together and then dismantled on the ground requiring two men and 4 inch pipe wrench,chain wrench <br /> and vise on truck. <br /> Secured forecourt and placed all into service with no product dispensed.Observed customers dispense with no problems.Left paper work on <br /> site in compliance box and filled out maintenance log on 101623 at 15:10 PM REB. <br /> 10/18/23 Performed and uploaded JSA to Walton work order. <br /> 10/18/23 On site for Tank-Remove 87 nipple. <br /> Arrived on site monitor shows all functions normal. <br /> Used truck and cones to secure 87 fill sump. <br /> Used OPW tool two men with 24 inch pipe wrenches and cheaters to attempt to remove nipple and swivel adapter.Riser was spinning along <br /> with spill bucket.Tightened bucket with riser back to tank and was able to break seal from bucket to riser. <br /> Removed bucket with nipple and swivel adapter still intact. <br /> Secured nipple and swivel to vice in an attempt to break seal from bucket. <br /> Due to spill bucket being composite was not able get 36 inch pipe wrench to bite without damaging spill bucket. <br /> 10/25/23 Arrived onsite to make remove make 87 drop tube accessible.Confirmed that spill container would need to destroyed in order for nipple to be <br /> removed.Replaced the entire spill container assembly. Droptube was removed,inspected and measured. Proper valve height was <br /> confirmed,droptube was reinstalled,and air tested for leaks for which there were none.New spill container was hydro-statically tested <br /> without issue. An official overfill prevention inspection form was prepared as well.Old spill container was placed on a Walton supplied <br /> hazmat drum as there was no solid waste drum onsite.Monitor reads all functions normal at departure. <br /> Open Problems: <br /> 10/16/23 Two men and 4 inch pipe wrench,chain wrench and vise on truck. <br /> 10/18/23 Cannot remove nipple from spill bucket,bucket is composite and will need to be replaced. <br /> Need new fill spill bucket,19"nipple and swivel adapter. <br /> Part#:310-11010 Desc.:OPW spill container composite Qty:1 MS:0 <br /> Part#:301-13011 Desc:OPW fill swivel adapter Qty:1 MS:2 <br /> 4 x 19 inch nipple Qty:1 <br /> Parts Used: <br /> Qty Part# Mfg Mfg Part# New Serial# Desc Reason <br /> 1 301-13011 OPW 61SALP-1020-EVR Swivel Adapter-Fill,EVR 7 <br /> 1 301-11012 OPW P761C-EVRDV Spill Container,Fill MP[New Style] 7 <br /> 1 4"X19"Steel Nipple <br /> 1 301-15091 OPW 61JSK-44CB Jack Screw Assembly Kit [Cast SC] 7 <br />