Laserfiche WebLink
Item No. 2 <br /> - , PC: 12-16-93 <br /> ER-93-1NP-93-4 <br /> Page 16 <br /> C. GEOLOGY/GEOTECHNICAL <br /> C.1. Potentially Significant Impact: The proposed project would expose workers.and project facilities <br /> to seismic hazards. <br /> Finding: <br /> Changes or alterations have been required in, or.incorporated into,the project which avoid or <br /> substantially lessen the significant environmental effect as identified in the Final EIR. <br /> Statement of-Fact: <br /> This impact will be reduced by the following: <br /> Seismic design shall be in accordance with the Uniform Building Code(Seismic Zone 4), <br /> as specified in the project geotechnical report contained in Appendix F of the Final EIR. <br /> C.2. Potentially Significant Impact: Excavated and fill slopes at the proposed proiect site could <br /> potentially fail, causing injury,damage to facilities. or burying solid waste material. <br /> Finding: <br /> Changes or alterations have been required in, or Incorporated into, the project which avoid or <br /> substantially lessen the significant environmental effect as identified in the Final EIR. <br /> Statement of Fact: <br /> This impact will be reduced by the following: <br /> All new cuts and fills shall be consistent with the geotechnical recommendations <br /> contained in Appendix F of the Final EIR. In areas where slopes are steeper than 2:1,"the <br /> following mitigation measure shall be implemented: regrade slopes to 2:1 or flatter,or set <br /> back all improvements at least 30 feet from the top and bottom of slopes, or erect <br /> landslide debris barriers. <br /> C.3. Potentially Significant Impact: Existing surface soils are inadequate to support foundations for the <br /> proposed proiect facilities. <br /> Finding: <br /> Changes or alterations have-been required in, or incorporated into,the protect which avoid or <br /> substaritially lessen the.significant environmental effect as identified in the Final EIR. <br /> Statement of Fact: <br /> This impact will be reduced by the following: <br />