Laserfiche WebLink
Secondary Containment <br /> Vacuum Sensing System <br /> Maximize protection with a vacuum <br /> monitored secondary containment MYy ► <br /> system . <br /> A Secondary Containment Vacuum Features and Benefits Facilitates periodic operability testing <br /> Sensing System for use with Veeder- Satisfy Requirements Leverage Existing Veeder-Root Systems <br /> Root's ATG Systems. The Secondary Caded to meet Califomia's regmmyiest for • Uses STP as the vacuum source and wols with <br /> secondary space monitoring for tanks and lines Red admt and FE SIPS <br /> Containment Vacuum Sensing (SCVS) asmquiredbyAB2481 • lnstallsintheSTP ' andconnectstothe <br /> System is designed to detect leaks in double- Sages the requirements for Class I Leak <br /> walled tanks and piping systems while Detection as ddnedby the European consoleto s a m�ysafewrnng <br /> helping to contain a release of product while Standard IN 13160-2 Abletoshare c°ndtntwuh °� <br /> P g P Veeder--Root intrinsically safe (LS) probes and <br /> • National Work G <br /> 3rd Parry, roup and LG113 <br /> under vacuum. The system consists of: listed sensors including sump or line leak sensors <br /> • Interfaces to the Smart Sensor Interface with <br /> • Vacuum Sensors, connected to tank, Reduce Exposure to Risk Embedded PtesstneModule <br /> sump or piping interstices • Alarms when vacuum cannot be maintained • Provides for positive sbut down of pressurized <br /> or when replenish rate cmm& 851kers per hour ]roes v� R�°� <br /> • A Submersible Turbine Pump (STP) , The system ala= when liquid s detected in • Simple inura➢ation, no need to mess with brine <br /> to provide a source of vacuum thesecondaryspace <br /> • A Smart Sensor Interface with Embedded <br /> Pressure Module in a TLS-350 Operating Temperature Rating: Console Capability <br /> Monitoring System -25 degrees C to +70 degrees C The Vacuum Sensor is compatible with <br /> the following consoles: <br /> Cable Length: Console <br /> The Vacuum Sensor is interfaced to Veeder- 8 feet TL8350R/EMC w/BIR• <br /> Root's TLS-350 Monitoring System via TLS-350 Plus/EMC Enhanced* <br /> intrinsically safe wiring to provide system Sensor Dimensions: TLS-350/EMC' <br /> status, replenish rate, alarm, and diagnostic 5" high x 5" wide 2" deep 'Upgrade Note: The Vacuum Sensor System requires <br /> the console to have version 24C software or greater) <br /> information. along with an ECPU2 or ECPU w/ NVMEM 1 board. <br /> Standard Models <br /> Vacuum Sensor Kits are available in a variety Veede'rFRoof P/N-- - Description <br /> of models: 330020-467 4 Vacuum Sensor Krt' for steel tank <br /> 330020-468,469,4709471 4 Vacuum Sensor Kt` for fiberglass tanks (4',6',8' , 10') <br /> 330020486 4 Vacuum Sensor KX for no tank <br /> • For monitoring double-walled piping 330020-472 3 Vacuum Sensor Kt• for steel tank <br /> 330020-473,474,475,476 3 Vacuum Sensor 1w for fiberglass tanks (4',6',8',10') <br /> and sump interstices 330020485 3 Vacuum Sensor Kr for no tank <br /> For monitoring double-walled steel tank 330020479 2 Vacuum Sensor lar for steel tank <br /> interstices (see back page) 330020-481 ,482,483,_484 2 Vacuum Sensor IGr for fiberglass tanks (4%6' ,8%101 <br /> 330020480 2 Vacuum Sensor Kr for no tank <br /> • For double-walled fiberglass tanks 330020=495 1 Vacuum Sensor IW for no tank <br /> 857280-100 Vacuum Sensor for piping & sumps <br /> These kits differ in the number of vacuum 857280-200 Vacuum Sensor for steel tanks <br /> 857280-301 ,- 3021-303,304 Vacuum Sensor for fiberglass tanks (4',6',8',10') <br /> sensors and the configuration of associated 330020448 Mounting Kit <br /> liquid sensors. An inline kit mounted liquid 332217-001 Relief Valve Assembly <br /> sensor is used for Vacuum Sensors 332250-001 Smart Sensor w/Embeddd Pressure Sensor Module (7 Channel)" <br /> monitoring piping and sumps. An external Accessories Part Description _ guantiWl.ength Part Number <br /> 1 /4" NPT Barbed Fittings 3 330020-487 <br /> liquid sensor (to be installed in the secondary 1 /4" NPT Barbed Rtlings 15 330020488 <br /> space at the bottom of the tank) is provided 1 /4" NPT Barbed Fittings 25 330020-489 <br /> with one of the Vacuum Sensors in the steel Barbed Tee 1 576316.807 <br /> g��VE Vacuum Hose 25' 25' 332310-001 <br /> and fiber for the tank. vacuum Hose 50' So' 332310-002 <br /> Vacuum Hose 100' 100' 332310-003 <br /> 3—Way Ball Valve 1 576008-649 <br /> ValveSchrader <br /> MAY 2 4 `lV 3 Schrader Valve Barbed Friting 5 330020 497 <br /> Kis Include mounting bracket, 6' of vacuum hose, reld vahie assembly (d requ6edl and Oce appropriate number of Squid sensors, <br /> ENVIRONMENTAL 3mmy ball valves, barbed fittings and hose clamps so that each vacuum sensor can monitor a single tank, sump or piping interstices. <br /> HEALTH DEPARTMENT <br /> The Modules (p System requires ca° be used fone 7 r\bcuum Sensors eight and above.l Smart Sensor interface Wth Embedded Pressure Module, a channel Smart <br /> For more information call: 1 =888=561 =7942 <br /> VEEDER-ROOT <br />