Laserfiche WebLink
Page 4 <br /> Safety Data Sheet <br /> according to 1907/20061EC (REACH), <br /> 1272120081EC (CLP), and GHS <br /> Printing date 25.05.2012 Revision:24.05.2012 <br /> Trade name:ALCONOX <br /> (Ccntd.of page 3) <br /> See Section 8 for information on personal protection equipment. <br /> See Section 13 for disposal information. <br /> 7 Handling and storage <br /> 7.1 Precautions for safe handling <br /> Prevent formation of dust. <br /> Keep receptacles tightly sealed. <br /> Information about fire-and explosion protection: No special measures required. <br /> 7.2 Conditions for safe storage, including any incompatibilities <br /> Storage: <br /> Requirements to be met by storerooms and receptacles: No special requirements. <br /> Information about storage in one common storage facility: Not required. <br /> Further information about storage conditions: Protect from humidity and water. <br /> 7.3 Specific end use(s) No further relevant information available. <br /> 8 Exposure control slpersonal protection <br /> Additional information about design of technical facilities: No further data; see item 7. <br /> 8.1 Control parameters <br /> ' Ingredients with limit values that require monitoring at the workplace: <br /> 7722-88-5 tetrasodium pyrophosphate <br /> REL(USA) 5 mg/ml <br /> TLV(USA) TLV withdrawn <br /> EV(Canada) 5 mg/m3 <br /> Additional information:The lists valid during the making were used as basis. <br /> 8.2 Exposure controls <br /> Personal protective equipment: <br /> General protective and hygienic measures: <br /> Keep away from foodstuffs,beverages and feed. <br /> Immediately remove all soiled and contaminated clothing <br /> Wash hands before breaks and at the end of work. <br /> Avoid contact with the skin. <br /> Avoid contact with the eyes and skin. <br /> Respiratory protection: <br /> In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer <br /> exposure use self-contained respiratory protective device. <br /> Protection of hands: <br /> Protective gloves <br /> The glove material has to be impermeable and resistant to the product/ the substance/ the <br /> preparation. <br /> Due to missing tests no recommendation to the glove material can be given for the product/the <br /> preparation/the chemical mixture. <br /> Selection of the glove material on consideration of the penetration times, rates of diffusion and the <br /> degradation <br /> (Contd.on page 5) <br />