INSTALL_2023 - Laserfiche WebLink

Home Browse Search

Specifications Standard Models Operating Temp.: -25°to+130°F. Form No. Description Compatible fuels: Unleaded gasoline 848480-001 Pressurized Line Leak Detector for F.E.Petro Pumps- Leaded gasoline 848480-002 Pressurized Line Leak Detector with in-line check valve 5%methanol/95%unleaded for Red Jacket and Tokheim Pumps(includes line leak 10%ethanl/90%unleaded 15%MTBE/85%unleaded sensor,in-line check valve,and pump port strainer) Diesel 848480-003 Pressurized Line Leak Detector with SwiftCheckTM for Kerosene Red Jacket and Tokheim Pumps(includes line leak Jet Fuel sensor and SwiftCheckTM check valve) Aviation gasoline 'Requires an F.E.Petro Precision Check Valve,F.E.Petro Part Number Line flow rate: 120 gpm.max. 400153925. Veeder-Root check valve not required. Design: Intrinsically safe Console Compatibility Operating Range: 0-50 psi. TLS-350R Consoles- Series 8482 Proof Pressure: 200 psi TLS-350 Consoles Series 8470 "Pressurized Line Leak Interface Module,Form No.330373-001,and Pressurized PLLD Supported Pumps Line Leak Controller Module,Form No.330374-001,required for use of PLLD with TLS-35OR or TLS-350 consoles.A software enhancement module is also available Red Jacket: P33R1 (1/3 HP) to enable 0.1 gph leak detection for PLLD. P75S1 (3/4 HP) PLLD Supported Applications P150SI (1-1/2 HP) Supported Piping: 2'Fiberglass-350' F.E.Petro: STPR 33(1/3 HP)' 3"Fiberglass-150' STPR 75(3/4 HP)' 2'Steel-440' STPR 150(1-1/2 HP)' 1-1/2 Enviroflex-400' Tokheim and Bennett: 23 psi ouput minimum Supported Applications: Siphon/Manifolded Tanks(Two Tanks- Red Jacket Big Flo: P300H3-2HB(3 HP)Only One Pump) FE Petro High Capacity: STP3(3 HP)Only Manifolded Lines(Two Tanks-Two Pumps Into Common Line) "R"designates precision check valve Electronic Blenders Contact Veeder-Root for approved piping systems No Mechanical Blenders SwiftCheckTM Typical Installations The SwiftCheckTM valve installs into the 2"leak detector port on the Red from the check valve,install a 2"tee,and mount the Veeder-Root line Jacket or Tokheim submersible pump.The Veeder-Root line leak sensor leak probe into the tee. is then screwed into the SwiftCheckTM valve. Disable the pump's functional element by removing its spring and piston. Disable the pump's functional element by removing its spring and piston. Pressurized Line Leak Detector Installation Cable In-Line Check Valve Veeder-Root offers direct burial cable(Form No.838100-xxx)for The in-line check valve is threaded at both ends for a 2" NPT fitting and locations where conduit does not exist.See price list for ordering should be installed into the submersible pump discharge. Downstream information. SwiftCheckTM Installation Diagram In-Line Check Valve Installation diagram LINE LEAK LINE LEAK SENSOR io SENSOR VENT SCREW G ,® O g VALV CHECK e VALVE 2'PIPE TEE v 0 I \U .__iN-LINE CHECK VALVE YVEEDER-ROOT Environmental Products The Leader in Tank Monitoring Technology 125 Powder Forest Drive,Post Office Box 2003,Simsbury,CT 06070-2003 TEL:(860)651-2700,FAX:(860)651-2719 TECH SUPPORT:(860)651-2753 BRAZIL:Sao Paulo•CANADA:Mississauga.Ontario • ENGLAND:Richmond Surrey•FRANCE:Rungis Cedex•GERMANY:Neuhausen/Filder•SINGAPORE Singapore pnntea AR9 13292 Replaces 13180 P/N 577013-071 u.s95 A.