Laserfiche WebLink
ICM(I)-16, 20, and 24 GAME IN-COUNTER DISPENSER INSTALLATION <br />TAKE-A-TICKET, INC. RECOMMENDS YOU HAVE A PROFESSIONAL CONTRACTOR INSTALL <br />THIS UNIT. HERE ARE SOME SUGGESTIONS IF YOU CHOSE TO DO IT YOURSELF. <br />HOLES IN THE COUNTER ARE NOT FOREVER BUT IF YOU MAKE A MISTAKE IT WILL SEEM SO! <br />Note: You may want to remove the loose top glass that is taped in before you start or leave it <br />taped in and work carefully. <br />#4 STEPS FOR INSTALLATION: <br /> <br />1. Before you cut a hole make sure you have clearance under the counter! <br />The hole is at least 18-3/4" x 18-3/4" and the depth of the unit below the counter top is <br />about 20" <br />The hole should be set in at least 3" from the clerk's side of the counter so the clerks won't <br />bump into anything extending from under the counter. <br />Draw the hole cut on the counter. 18-3/4" x 18-3/4" and at least 3" from the clerk side of the <br />counter. MEASURE IT AGAIN!!! <br />MAKE SURE YOU HAVE CLEARANCE UNDER THE COUNTER!!! <br />Once you are sure of clearance and the hole's location check it again, and again! <br />Separate the upper and lower portions of the dispenser. Do not lose the carriage bolts, <br />washers and wingnuts. Remove the trays from the unit and set aside. <br />Cut the hole. Wait! Are you sure about the location? <br />The hole size is 18-3/4 x 18-3/4". <br />Apply a bead of caulking around the hole on the counter surface. <br />Drop the upper portion of the dispenser with the metal frame and glass into hole. The open <br />side with no white plastic faces the clerk's side. <br /> <br />4. Reattach the base of the dispenser to the upper part using bolts, washers, and nuts. There <br />is some adjustment possible up and down for the lower unit. <br />Load the display tray and place it up under the glass. Removing the top ticket tray may be <br />required to install the display tray. See the other side of this sheet for loading instructions. <br />Use the numbered clips provided on the displayed tickets to make it easy for the customer <br />to tell which ticket they want to buy. <br />Load the trays with the ticket packs. Place the tickets under the plastic rods. Do not run the <br />tickets over the rods. Place the trays in the dispenser and lock. <br />Note: The bottom piece of glass is sealed in place to prevent leaks under the counter. <br />QUESTIONS? Call us at (800) 253-4295 or email: info@tatinc.com