Laserfiche WebLink
subtract valve length (w} from distance ter tank <br />bottom (B) <br />tv)M 01>- (w) =� <br />Note. Lowertubeclearancemust meet tankmanu- <br />facturer requirements and all AHJ, local, state, and na- <br />tional codes. Typical idearanceisahout4', IFiawer <br />tube clearance is Trot met valve must be removed and <br />adjusted to meet these requiremenK <br />Subtrea valve length IUY from distance to tank <br />bottom j8) <br />Note: Lower tube distance from tank bottern totop <br />of cut must meet all AHI, local, state, and national <br />codes, For reference per4ll CFR 63 subpan CCCCCC/ <br />HESHAP Ihelower tube can be no more than ri" from <br />the bottom of the tank. If lower tube distance is not <br />met valve must be removed and adjusted to meet these <br />requlremen%. <br />4. To drtwmina float t,lignmont: <br />I.oaking into upper ntbe (see <br />tryure}the float shoukt be <br />aliW ned along the length of the tank if Float is not <br />aligned Mperly adjustments need to be made. <br />View into dreg tufre frenv gfrove <br />zt <br />