Laserfiche WebLink
Subtract valve length (+rv) from distance to tank <br />hattorn (A) <br />Not,, Lower tubeclearancemuStrneettank manu- <br />facturer requifernents and all AM local, state, and na- <br />tional codes. Typical clearance is about 4'. IF lower <br />tune clearance is not met valve must be removed and <br />adjusted to meet these requiremenK <br />Subtra Y valve feng[h (U3 irom distance to tank <br />bOttDm (B) <br />m=(s)-(u)= <br />Nobe: Lower tube distance from tank bauem to rap <br />of cut rnutt meet all AW local, state, and national <br />codes. Por reference per40 CFR 63 subpan CCCCCC/ <br />NESHAP the lower tube can be no more titan 6" From <br />the bottom of the tank. If lower tube distance 6 not <br />met valve must be removed and adjusted to meet these <br />requlrements. <br />4. To drlart!n1n� ffDlt alignment: <br />Looking Inca upper tube (see figure} the float should be <br />aligned along the length of the tank ff f oat is not <br />aligned properly adjustments need to be made. <br />View into drop tv{H fweq drove <br />zt <br />