Laserfiche WebLink
Health and Safety Plan <br /> Underground Tank Program <br /> Tank Removal or <br /> Over-Excavation Resample <br /> INTRODUCTION <br /> PURPOSE AND SCOPE <br /> The Health and Safety Plan , for underground tank removal /over-excavation provides for the <br /> protection of on-site personnel and the surrounding community during site characterization activities . <br /> The requirements , specifications and procedures presented with the plan will apply to all personnel <br /> on-site , including employees , subcontractors , site visitors and regulatory agency. personnel . <br /> HAZARD ANALYSIS <br /> The most significant risk associated with petroleum contaminated soil is exposure to aromatic <br /> compounds . Skin contact will be eliminated by use of clothing, eye wear, and gloves and the <br /> inhalation hazard will be minimized using appropriate respiratory protective devices as determined by <br /> on -site air monitoring . The Safety Coordinator/Project Manager will establish an exclusion zone <br /> encompassing a 50-foot radius from the work area. Access Within this zone will be limited to <br /> required personnel . Total organic vapors will be monitored within the exclusion zone using a <br /> photoionization detector (PID) calibrated for benzene , the most toxic of the aromatic hydrocarbons . <br /> Current enforceable and recommended exposure limitations for potential site contaminants are <br /> presented in Table 1 . <br /> PERSONAL PROTECTIVE EQUIPMENT <br /> A minimum of U . S . EPA level D protection will be required within the exclusion zone for any <br /> workers engaged in sample collection or other activities on this site. Level D protection will include : <br /> • Disposable Tyvek coverall (when in contact with contaminated material) <br /> • Boots with steel toe <br /> Splash goggles or safety glasses <br /> • Chemical resistant disposal gloves (when in contact with contaminated material ) <br /> Level C protection will be required if PID readings exceeding 10 ppm over background <br /> concentration are recorded in the workers ' breathing zone. Level C protection will consist of: <br /> • Disposable Tyvek coverall <br /> • Boots with steel toe <br /> • Chemical resistant boot covers <br /> • Chemical resistant disposal gloves (inner) <br /> • Chemical resistant outer gloves <br /> • MSHA/NIOSH approved half-mask air-purifying respirator with dual organic vapor <br /> cartridges <br /> PID readings exceeding 250 ppm in the workers ' breathing zone will require work stoppage <br /> and site evacuation. An explosion-proof fan may be used to vent the work area . <br />