Laserfiche WebLink
CHEROKEE ARCOSite: <br />12/20/23Date: <br />21 <br />Take the following measurements with the valve in­ <br />stalled in the tank: <br />Using the tank calibration chart provided by the tank <br />manufacturer determine the tank capacity at the cal­ <br />culated (X) dimension and the 100% volume (Y) tank <br />capacity. <br />1. To determine shut-off percentage: <br />Subtract upper tube length (D) from distance to tank <br />bottom (B) <br />(X) = (B) - (D) - 2" = 102 106.5 108 <br />Note: The overfill valve must be installed per AHJ require­ <br />ments and all applicable local, state, and national codes. If <br />the overfill valve is set above the allowable shut-off percent­ <br />age the overfill valve must be removed and replaced. For <br />reference 40 CFR part 280 Subpart B Section 280.20 overfill <br />valves should be set to a maximum of 95%. <br />Distance from the 71 SO inlet tube flange to the cast <br />lug in the 71 SO body (see figures), upper tube length. <br />Note: the Upper Tube Length must be at least 16" to in­ <br />clude the protective bend in the tube. <br />(D) = 74 72.5 71 <br />Distance from the 71 SO inlet tube flange to the top and <br />bottom of lower tube, valve length. <br />(W) = 173 178 178 <br />(U) = 173 178 178 <br />Distance from the 71 SO inlet tube flange to the bottom <br />of the tank. Note: If a tank bottom protector is present it <br />may be necessary to add this thickness to dimension <br />(OPW 6111 & 61TP models add 0.6") <br />(B)= 181 181 181 <br />From the tank calibration chart provided by tank manu­ <br />facturer find the dipstick number (Y) which corresponds <br />to the 100% volume. <br />(Y) = 119 119 119 <br />(X) tank capacity in gallons = 22809 11266 9802 <br />(Y) tank capacity in gallons = 24970 11873 10318 <br />SO% = (X) capacity / (Y) capacity xlOO = 91 3 94 8 94-9 <br />Appendix B <br />71 SO Overfill Valve in Tank Shut off Level Worksheet TankID 8791BTester DW <br />Important: This is meant to be supplemental worksheet and not a substitute to following the installation <br />manual instructions. All length measurements are in inches. Please contact the Authority Having Jurisdic­ <br />tion (AHJ) and review local, state, and national codes to determine the regulatory requirements governing <br />shut-off capacity in your region, as well as take into account other considerations such as extreme tank tilt. <br />(U) Valve <br />Length, <br />top of cut <br />(D) <br />Upper <br />Tube <br />(W) Valve <br />Length, <br />bottom of <br />cut <br />(Y) <br />Tank <br />Chart <br />100% <br />Volume <br />Dipstick <br />(B) <br />ToTank