COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

program cy:le is complete by sounding five audible "beeps". The sterilizer may be svri:ched to standby at this time or restarted if additional sterilization programs are desired. Mechanical Features Installation The M9 UltraClaveT"' sterilizers . . . • have a tray rack which can hold two small and two large trays. The tray rack can be removed for periodic cleaning of the chamber, tray plate, tray rack, and filter. Description have an optional printer which provides a permanent record of actual expo- surE times and temperatures. • have a removable power supply cord (100 and 230 VAC units only). • have a two gaskets in the door; a dam gasket and a door gasket which can easily be replaced by operator in seconds. Safety Features The M�- UltraClaveTM sterilizers . . . • have a door stop which prevents the door from opening fully if there is a slight residual pressure in the chamber when the door handle is operated. The door stop also retains the door in a partially open position during the drying cycle. • hav-3 a door closed switch which is used to signal the sterilizer that the door is coripletely closed. This switch is activated just as the door becomes fully closed. An audible signal will sound and the "Door Ajar" light will flash if the door is not fully closed. • have a water low indicator which signals the operator if there is insufficient water to fill the chamber to the proper level. An audible signal will sound and the "Water Low" light will flash if the reservoir needs to be refilled with water. • have their chamber temperature monitored during a cycle to prevent an overheat condition. If chamber temperature reaches or exceeds 146°C (2950F), power to the sterilizer is cut off. • have a pressure relief valve which opens to provide backup protection to reduce chamber pressure in the event that the chamber steam pressure exceeds the allowable limit. Released steam is directed out of the bottom of the unit's cabinet. An access cover is located on the top cover for relief valve operational checks. • have a fault detection circuit which monitors all functions of the sterilizer during a cycle. If a fault occurs during a cycle, the sterilizer monitoring cir- c&ry will stop the cycle, sound an audible signal, and light a flashing error lamp. 1