COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

Ref. Control Function 1 Temperature/Time dis- alternately indicates cycle temperature and play exposure time when a cycle is selected. Dur- ing a cycle, the cycle time remaining is dis- played. 2 Pressure display indicates current chamber pressure during a cycle. 3 FILLING indicator illuminates when the chamber is being filled with water at the beginning of a cycle. 4 STERILIZING indicator illuminates during the heat up and sterilization phases of a cycle. 5 DRYING indicator illuminates during the drying phase of a cycle. 6 COMPLETE indicator illuminates when a cycle is complete, indicat- ing that the sterilized goods may be removed at this point. 7 WATER LOW indicator indicator flashes (and a beep sounds) when the water level is too low in the reservoir to ini- tiate a cycle. 8 DOOR AJAR indicator indicator flashes (and a beep sounds) when the door is not completely latched. • 9 ERROR indicator indicator flashes(and a beep sounds)when a cycle is terminated before completion. NOTE: a corresponding error code is dis- played on the Temperature /Time display any time an error occurs. See Error Code Guide for a detailed explanation of each error code. 10 UNWRAPPED button when pressed, selects a program cycle designed to process unwrapped instruments at 1320C(270°F)for 3 minutes with a 30 minute drying cycle following the sterilization phase. 11 POUCHES button when pressed, selects a program cycle designed to process instruments and dental handpieces in combination paper/plastic sterilization pouches or wrapped instruments at 1320C(270°F)for 15 minutes with a 30 minute drying cycle following the sterilization phase. 12 LIQUIDS button when pressed, selects a program cycle designed to process non-volatile liquids at 121°C(250OF)for 30 minutes. 13 PACKS button when pressed, selects a program cycle designed to process packs of instruments at 121°C(250°F)for 30 minutes with a 30 minute drying cycle following the sterilization phase.