Laserfiche WebLink
Measure $ record "A" and '%" and then peform the following calculation: <br />"14" " Drop tube seal surface to the bottom of the tank <br />- (subtract) <br />"Z" Q , " Upper drop tube Range to the edge of the upper tube adapter <br />- (subtract) <br />4.5" Reference offset <br />_ (equals) <br />vc,inca <br />4r <br />q7 Z9' gal Actual tank capacity <br />- (subtract)? <br />11 gal Final shutoff volume <br />_ (equals) <br />Ullage volume remaining <br />The final Shutoff Volume Percentage may <br />be greater than 95% as long as the ullage <br />volume remaining is greater than or <br />equal to 250 Rallons, so that "..,none of <br />the fittings located on the top of the tank <br />are exposed to product due to <br />overfilling," according to EPA 40 CFR Part <br />280. The installation must also meet all <br />applicable regulatory requirements, and <br />must be acceptable to the Authority <br />Having Jurisdiction (AHJ). <br />Final shutoff volume height <br />Locate the final shutoff volume <br />height on the tank chart <br />Use the tank chart provided by the tank <br />provided by the tank <br />manufacturer to record and calculate the following: <br />manufacturer, and record the <br />closest corresponding volume. <br />Sgal Final shutoff volume <br />(divide by) <br />q -12y gal Actual tank capacity <br />X (muliply by) <br />100 <br />= (equals) <br />If the final shutoff volume <br />percentage is 95% or less, the <br />Final shutoff volume percentage <br />Installation conforms to FFs and <br />Industry recommended practices. <br />q7 Z9' gal Actual tank capacity <br />- (subtract)? <br />11 gal Final shutoff volume <br />_ (equals) <br />Ullage volume remaining <br />The final Shutoff Volume Percentage may <br />be greater than 95% as long as the ullage <br />volume remaining is greater than or <br />equal to 250 Rallons, so that "..,none of <br />the fittings located on the top of the tank <br />are exposed to product due to <br />overfilling," according to EPA 40 CFR Part <br />280. The installation must also meet all <br />applicable regulatory requirements, and <br />must be acceptable to the Authority <br />Having Jurisdiction (AHJ). <br />