COMPLIANCE INFO_2024 - Laserfiche WebLink

Home Browse Search

SP001 Tank Inspection Report Interstate Truck Center, 2110 S. Sinclair Ave. Stockton, CA September 2024 Strandberg Associates 1(650) 796.9732 john@strandbergassociates.com 16 STI Annual Inspection Sheet 1 Yes No NA 2 Yes No NA 3 Yes No NA 4 Yes No NA 5 Yes No NA 6 Yes No NA 7 Yes No NA 8 Yes No NA 9 Yes No NA 10 Yes No NA 11 Yes No NA 12 Yes No NA 13 Yes No NA 14 Yes No NA 15 Yes No NA 16 Yes No NA 17 Yes No NA Yes No NA Yes No NA Yes No NA Yes No NA Yes No NA Yes No NA Yes No NA Yes No NA 19 Yes No NA 20 Yes No NA 21 Yes No NA 22 Yes No NA 23 Yes No NA 24 Yes No NA 25 Yes No NA Note 2: Interstice monitor port stuck closed. Note 3: Note 4: Insulation free of mold? Free of visible signs of coating failure? Other Equipment Are electrical wiring and boxes in good condition? Has the cathodic protection system on the tank been tested as required by the designing engineer? Pressure regulator valve. Expansion relief valve. Note1: Emergency vent stuck closed. Are strainers and filters clean and in good condition? Insulated Tanks Free of missing insulation? Insulation free of visible Insulation free of noticeable areas of moisture? Solenoid valve Fire valve Is the emergency vent in good working condition and functional, as required by manufacturer? Consult manufacturer's requirements, Verify that components are moving freely (including long bolt manways). Emergency vent stuck closed. Is interstitial leak detection equipment in good condition? Are windows on sight gauges clear? Are wire connections intact? If equipment has a test function, does it activate to confirm operation? Interstice monitor port stuck closed. 18 Are all valves free of leaks, corrosion, and other damage? Follow manufacturers' instructions for regular maintenance of these items. Check the following and verify as applicable: Antisyphon valve Check valve Shear valve Gate, ball or isolation valve. Have flame arrestors been maintained per manufacturer's recommendations? Tank Manways and Piping Are piping system joints, manway covers, gaskets, and attachment bolts tight and in good condition with no sign of wear, damage, leaks or corrosion? Are piping supports in good condition and free of corrosion and damage? Is leak or release detection on underground piping being performed and documented if required? Tank Equipment Normal and emergency vents free of obstructions? Have the level sensing devices, (e.g. level gauges, alarms) been checked for operability, where possible, as per the manufacturer's instructions or good engineering practice? Free of noticeable distortions, buckling, denting, or bulging? Free standing water on roof? Are labels and tags intact and legible? Free of visible signs of coating failure? Tank Foundation/Supports Free of tank settlement or foundation washout? Concrete pad or ring wall free of spalling? Tank supports in satisfactory condition? Is water able to drain away from tank if tank is resting on the ground? Is the grounding strap between the tank and the foundation/supports in good condition? Tank Shell Heads and Roof Inspector's Signature: Inspection Date: 9/11/2024 ITEM STATUS COMMENTS Facility Name: Interstate Truck Center, 2110 S. Sinclair Ave. Stockton, CA Tank ID: 12,000 gal diesel fuel tank STI SPOO1 Annual Inspection Checklist General Inspection Information Inspector Name: John Strandberg PE Inspector Title: Professional Engineer AST7337 Retain until date: Until out of service.Prior Inspection Date: Unknown