Laserfiche WebLink
Step 3 . Install screw thru the support plate into the <br />sump until the support plate (and spacer ring if <br />used) is snug to the pool surface and there is <br />no gap behind the support plate. <br />HOW TO CUT SCREWS <br />Step 1 . Install the screw into the support plate and <br />measure the distance between the bottom of <br />the screw head and the notch in the support <br />plate. <br />Step 2 . Remove the screw. Using a screw cutter <br />(typically found in the handle of wire strippers) <br />cut screw to the correct length. <br />For technical assistance call 1.800.621.5886 or contact your regional representative <br />5