COMPLIANCE INFO_2025 - Laserfiche WebLink

Home Browse Search

OMNTEC CLD SERIES USERS GUIDE Advmced `Monitoring& [Moctlw PORTABLE CONTAINMENT SUMP TESTER I. NEW EPA REGULATION 40 CFR PART 280.35 AND ITS IMPACT ON MANDATORY SUMP TESTING In summary,EPA Regulation 40 CFR Part 280.35 regards the periodic testing of spill prevention equipment and containment sumps used for interstitial monitoring of piping and periodic inspection of overfill prevention equipment such as spill buckets. A low sump test option can also be performed.Owners and operators of Underground Storage Tank(UST)systems,with spill and overfill prevention equipment and containment sumps used for interstitial monitoring of piping, must meet these requirements to ensure the equipment is operating properly and will prevent releases to the environment. Owners and operators must maintain records(in accordance with§280.34)for spill prevention equipment, containment sumps used for interstitial monitoring of piping,and overfill prevention equipment and all records of testing or inspection must be maintained for three years. II. OVERVIEW OF THE CLD SERIES(OEL8000111-CLD)PORTABLE CONTAINMENT SUMP TESTER COMPONENTS AND WHAT IS INCLUDED The system,conveniently stored in a durable Pelican case equipped with wheels for ease and accessibility, provides on-the-spot containment leak detection.The kit is available in multiple probe configurations(1-8) depending on your specific site requirements.Each system includes: • Durable Pelican cases with wheels(for CLD-programmed ATG and probes) _ • (1)OEL8000111-CLD* microprocessor-based controller with printer • (1)RJ-45(Ethernet)port(accessible via left side of the controller) • MTG-probe input connector box(es) • MTG-probe(s)with mounting bracket(s) • Suspension chain(s)with S-hooks for the MTG- probe(s) • MTG-probe cable(s);50-feet in length each • (1)12-foot,3-pronged power cord (*OEL8000111-CLD-x kits are available in 1-to 8-tank sets. "-x"signifies the number of probes in the kit,e.g.,CLD-4 for a 4-probe kit. Equipment is supplied in appropriate quantities_) In addition to your OEL8000111-CLD kit,the following equipment and components may be required: Figure lA • Angle irons • Water • Grounded,3-prong extension cable(in addition to the supplied 12-foot power cable) • Safety cones • Items to stabilize the probe and probe cables,such as duct tape or weights. OMNTEC Mfg.,Inc.,2420 Pond Road,Ronkonkoma,NV 11779 Phone(631)981-2001 Fax(631)981-2007 www.OMNTEC.com File Name:500165 rev2118.docx Page 3 of 8 Rev Date:3-11-2021