WORK PLANS - Laserfiche WebLink

Home Browse Search

General information If you feel unwell, seek medical advice(show the label where possible). Show this safety data sheet to the doctor in attendance. 5. Fire-fighting measures Suitable extinguishing media Carbon dioxide(CO2). Water. Foam Unsuitable extinguishing None known. media Specific hazards arising from During fire,gases hazardous to health may be formed, the chemical Special protective equipment Self-contained breathing apparatus and full protective clothing must be warn in case of fire. and precautions for firefighters Fire fighting Move containers from fire area if you can do so without risk. equipment/instructions Specific methods Use standard firefighting procedures and consider the hazards of other involved materials. Use water spray to keep fire-exposed containers cool. General fire hazards No unusual fire or explosion hazards noted.The product itself does not burn. 6. Accidental release measures Personal precautions, Keep unnecessary personnel away.Avoid contact with spilled material. For personal protection, protective equipment and see section 8 of the SDS. emergency procedures Methods and materials for This product is miscible in water. Disinfect the spill area with 5%bleach solution after clean-up. containment and cleaning up Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading.Absorb in vermiculite,dry sand or earth and place into containers. Following product recovery,flush area with water. Small Spills: Wipe up with absorbent material (e.g.cloth,fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal,see section 13 of the SDS. Environmental precautions Avoid discharge into drains,water courses or onto the ground. 7. Handling and storage Precautions for safe handling Avoid prolonged exposure. Observe good industrial hygiene practices. Wear appropriate personal protective equipment(See Section 8). Conditions for safe storage, Store in original tightly closed container. Recommended storage containers: plastic lined steel, including any incompatibilities plastic,glass, aluminum, stainless steel, or reinforced fiberglass. Store away from incompatible materials(see Section 10 of the SDS), Store in a cool,dry area at 4-5°C(39-41°F). 8. Exposure controls/personal protection Occupational exposure limits No exposure limits noted for ingredient(s). Biological limit values No biological exposure limits noted for the ingredient(s). Appropriate engineering General ventilation normally adequate. Provide eyewash station. controls Individual protection measures,such as personal protective equipment Eyelface protection Tightly fitting safety goggles. Skin protection Hand protection The following glove materials are recommended: vinyl or rubber. Other Wear suitable protective clothing. Respiratory protection Not normally needed. In case of insufficient ventilation, wear suitable respiratory equipment. If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable)or to an acceptable level(in countries where exposure limits have not been established), an approved respirator must be worn. Thermal hazards Wear appropriate thermal protective clothing,when necessary. General hygiene Always observe good personal hygiene measures,such as washing after handling the material considerations and before eating, drinking,and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Bio-Dech€or INOCULUM0 Plus SDS US 923812 Version#:01 Revision date:- Issue date: 12-February-2015 2/6