Laserfiche WebLink
Proper motor rotation is critical. Be sure the motors are wired to rotate in the correct <br /> direction. Failure to do so could results in serious damage to the equipment <br /> Pre-start Checklist <br /> 1. Perform System Overview listed above. <br /> 2. If you purchased a Scott Equipment Twin Screw Infeed Conveyor: <br /> Make sure the two gear speed reducers on the infeed conveyor are filled <br /> with the proper weight and amount of oil. (Gear boxes are shipped without <br /> oil from the factory.)The recommended level and types of lubricants are <br /> listed in the gear reducer vendor manual (electronic copy provided). <br /> Running the machine without oil will cause serious damage to the gearbox <br /> that will not be covered under warranty. <br /> 3. If you purchased a Scott Equipment Drag Paddle Infeed Conveyor: <br /> Make sure the gear speed reducer on the infeed conveyor is filled with the <br /> proper weight and amount of oil. (Gear boxes are shipped without oil from <br /> the factory.)The recommended level and types of lubricants are listed in the <br /> gear reducer vendor manual (electronic copy provided). Running the <br /> machine without oil will cause serious damage to the gearbox that will not <br /> be covered under warranty. <br /> 4. If you purchased a Scott Equipment Single Screw Outfeed Conveyor: <br /> Make sure the gear speed reducer on the infeed conveyor is filled with the <br /> proper weight and amount of oil. (Gear box is shipped without oil from the <br /> factory.)The recommended level and types of lubricants are listed in the <br /> gear reducer vendor manual (electronic copy provided). Running the <br /> machine without oil will cause serious damage to the gearbox that will not <br /> be covered under warranty. <br /> 5. Secure all locking door bolts/nuts on doors/covers/lids. <br /> 6. When starting each system component,verify the correct shaft rotation with <br /> the directional sticker near the drive end shaft bearing. <br /> 111Page <br />