Laserfiche WebLink
T20 &T30 - Removing and Replacing Screens <br /> 1. Open Turbo Separator doors <br /> 2. Loosen and remove the breaker bar in the front of the machine <br /> 3. Loosen all nuts/bolts from the screen hold down bars <br /> 4. Rotate Turbo shaft to allow clearance to remove hold down bars from the front <br /> of the Turbo. <br /> 5. Once hold down bars are removed, remove the screen in the center of the <br /> Turbo out the center door opening. <br /> Note:it helps to"roll"the outcoming screen onto the paddles and rotate the shaft. <br /> 6. Slide the smallest screen from under the inlet area over to the center of the <br /> Turbo and remove through the center door opening. <br /> 7. Slide the last screen away from the discharge area so it can be removed through <br /> the center opening of the Turbo. <br /> 8. Reverse the order to install. <br /> T42 &THOR/MEGA THOR - Removing and Replacing Screens <br /> 1. Open Turbo Separator doors <br /> 2. Loosen and remove the breaker bars that hold down the individual screens. <br /> � s <br /> 3. Once hold down bars are removed, remove the screen(s)through the nearest <br /> door. <br /> 221 Page <br />