COMPLIANCE INFO_2026 - Laserfiche WebLink

Home Browse Search

ftrt ate riaEs 10 Series Emergency Top:Cast iron tow Profile Patented Thermal Shut-Off Valves Relief Valve OPW 10 Series Emergency Shut-off _ _Body_Cast iron 9 ry Disc:M-19 Main rUILValves are installed on fuel supply Poppet secondary lines beneath dispensers at grade level Carrier:Zinc-plated steel Seat ,."� ' Poppet to minimize hazards associated with Stem:Copper-nickel-chrome-plated brass Fusible link collision or fire at the dispenser.If the Poppet Spring:Stainless steel dispenser is pulled over or dislodged by Seal:M-19 0-Ring collision,the top of the valve breaks off Packingnut:Brass, Nickel-Plated, 'Teflon-coated at the integral shear groove,activating Inlet and outlet thread:1-112" (4 cm) NPT Main stem poppets and shutting off the flow of fuel. (British threads available) Single-poppet models shut off supply *With black Duragard®E-Coating Combination Main Poppet Body flow,while double-poppet models shut off supply as well as prevent release Features of fuel from the dispenser's internal ♦ High Flow Capacity—the primary ♦ Integral Test Port—a 318" (9.5 mm) piping.The base of the emergency valve poppet is held out of the flow stream test port allows the piping system to be is securely anchored to the concrete while the secondary poppet is held air-tested without breaking any piping normally open to minimize head loss connections. dispenser island through a stabilizer bar across the valve and to protect the poppet 40� Patented Thermal Relief Valve— system within the dispenser sump or pan seals from damage and erosion.True relieves excessive pressure over 25 psi to ensure proper shearing action.The 1-112" (4 cm)and 2" (5 cm)body sizes caused by thermal expansion of fuel in the valve base is secured to the stabilizer ensure maximum flow. dispenser piping system in the event of bar using a three-point boss mount Fire Protection—a fusible link trips fire(double-poppet models only). system or a U-Bolt Kit(not included) the valve closed at 165"F to shut off fuel ♦ Low-Profile Tops—female and union- 1 OUBK-015(1-112")and 10URK- supply to the dispenser. top double-poppet valves have a low- • Main Poppet Seat Integral to the 0200(2 sold separately).Valve inlet pp g profile top to allow upgrading from DPW Top Assembly—having the main poppet single-poppet valves without changing (bottom)connections are female pipe seat as an integral part of the valve top existing piping. threads and outlet(top) connections ensures a new,clean seating surface is ♦ Multiple Mounting Options—valves are available with female threads,male installed each time the top is replaced. are boss-mounted to stabilizer bars in threads or a union fitting.Other options This design also ensures that the integrity sumps and pans or mounted to bars include suction system models with a of the seal between the valve top and embedded in the island with optional bottom is verified during line testing and normally closed Secondary poppet which U-Bolt kits 10UBK-015(not included). . allows full inspection of the main poppet maintains prime,and models when the top is removed. Versatile Combination Body(boss mount/ with external threads on the inlet U-Bolt mount)models are available to s Duragard®-Coat Finish—provides accommodate most mounting applications body which connect to secondary superior corrosion resistance. with one valve style, containment systems. ♦ Reliable Shut-off—a stainless steel ♦ Underwriters Laboratories— VL main spring,a teflon-coated brass packing listed for use with gasoline and 85%and nut and a copper/nickel/chrome-plated 100%methanol.All DPW 10 Emergency brass stem are designed to prevent tar Shut-Off Valves meet requirements of UL build-up and corrosion from interfering STANDARD 842. with poppet operation after long periods ♦ Compatible with 85%ethanol(E85) of normal service without activation. PAIS Offset Adaptor Ordering Specifications The OPW PA15 Offset Adaptor Part q Thread Size Offset Height Width Body Weight is designed for adjusting in, mm in. min in. mm in. mm lb. kg misalignment of pipe in PA15-10 P/: 38.1 1 'S 25 VA 57.2 3/e 92.1 2 .9 dispenser sumps and suction dp PA15-15 11h ° 38.1 11h 38.1 21/4 57.2 41h 104.8 2 .9 stubs.The PA15 has a low Materials profile feature,and is designed PAT 5-20 Ph } 38.1 2 '51 VA 57.2 45/e "117.5 2 9 Ductile Iron for maximum flow. Black Duragard E-Coating DEFINING I WHAT'S