PW-ENCDRWY-2600204 - Laserfiche WebLink

Home Browse Search

DRIVEWAY ENCROACHMENT PERMIT To: Elevation Design and Consulting 2634 N Wilson Way Stockton, CA 95205 Permit No: PW-ENCDRWY-2600204 Date Issued: Start Date: 03/01/2026 Exp. Date: 02/28/2027 Project No. PWP110005 Extended To: Driveway Type: Commercial Location: 4146 St Rte 99 Frontage Rd.; E?S of Frontage Rd. Approx. 750' S/O Clark Dr. In compliance with your request of 01/15/2026 and subject to all terms, conditions and restrictions written below or printed as general or special provision on any part of this form. Permission is hereby granted to construct One driveway approach w/pipe shown on Permit Application No. PW-ENCDRWY-2600204 Jobsite shall be kept in a safe condition at all times by removing daily any excess dirt or debris which might be a hazard to pedestrian and/or vehicular traffic. Adequate lights, signs and barricades shall be placed and maintained by the Permittee for the protection of the public in accordance with the current Caltrans Standard Specifications. A(n) (Twelve Inches) inside diameter per section 62 of the current Caltrans Standard Specifications ALTERNATIVE PIPE AND PIPE ARCH CULVERTS, shall be installed in roadside drainage ditch for drainage flow maintenance and shall be of sufficient length to clear toe of approach fill or headwalls. The entire area of driveway approach(es), including flares for turning and / or paved frontage(s), from the edge of roadway pavement to right-of-way (front property) line shall be surfaced with a two inch minimum of asphalt concrete over 6 inches minimum of compacted layer of three-quarter inch maximum size aggregate base material (road gravel) conforming to Class 2 Aggregate Base specified in Section 26 of the current Caltrans Standard Specification, or with 6 inches minimum of portland cement concrete. If portland cement concrete pavement is installed, expansion joints shall be provided at the edge of pavement and along property line. Surface grades of approach(es) and/or to open ends of pipe. No ponding or puddles on pavement surface shall be allowed. Permittee shall call the Department of Public Works, Field Engineering Division (Permit Inspection) at (209) 953-7421 at least two business days prior to beginning and completion of any work within the County right-of-way. After completion of the work permitted herein, all debris, lumber, barricades or any excess material shall be removed and the jobsite left in a neat workmanlike condition. Driveway(s) shall be complete prior to occupancy of the residence, but not to exceed expiration date. FORMS: SS/WW, R-17 Najee Zarif, Acting Director Department of Public Works By: Scott Cooper Permit Section NON -ROAD CLOSURE PERMIT: Permittee/contractor MUST email County Field Engineering at PWinspection@sjgov.org a minimum of (2) business days prior to the start of any work within County right-of-way with the permit number, and contractor's contact information.