Laserfiche WebLink
PF Series High -Head Effluent Pumps <br />Applications <br />Our submersible High -Head Effluent Pumps are designed to <br />transport screened effluent (with low TSS counts) from septic <br />tanks or separate dosing tanks. All our pumps are constructed <br />of lightweight, corrosion -resistant stainless steel and engi- <br />neered plastics; all are field -serviceable and repairable with <br />common tools; and all standard 60 -Hz PF Series models are <br />CSA certified to the U.S. and Canadian safety standards for <br />effluent pumps, meeting UL requirements. <br />High -Head Effluent Pumps from Orenco® are used in a variety <br />of applications, including pressurized drainfields, packed bed <br />filters, mounds, aerobic units, effluent irrigation, effluent sew- <br />ers, wetlands, lagoons, and more. These pumps are designed <br />to be used with a Biotube® pump vault. <br />— Discharge <br />connection <br />— Bypass <br />orifice <br />— Suction <br />connection <br />A -us <br />LRB0980 <br />L82053896 <br />Features/Specifications <br />To specify this pump for your installation, require the following: <br />• Minimum 24-hour run -dry capability with no deterioration in <br />pump life or performance's <br />• 1/8 -inch (3 -mm) bypass orifice (patent pending) to ensure <br />flow recirculation for motor cooling and to prevent air bind <br />• Liquid end repair kits available for better long-term cost of <br />ownership <br />• TRI-SEAL'm floating impeller design on 10-, 20-, and 30-gpm <br />models; floating stack design on 50- and 75-gpm models <br />• Super stainless Franklin Electric motor, rated for continuous <br />use and frequent cycling <br />• Type SOOW 600-V motor cable (suitable for Class I, Division <br />1 and Division 2 applications) <br />• Five-year warranty from date of manufacture against <br />defects in materials or workmanship <br />"Not applicable for 5 -hp models <br />Standard Models <br />See specifications chart, pages 2-3, for a list of standard pumps. <br />For a complete list of available pumps, call Orenco. <br />Nomenclature <br />T'Cord length: <br />Blank = 10' <br />20* = 20' <br />30 = 30' <br />50 = 50' <br />Voltage (nameplate): <br />1 = 115 (1/2 hp only) <br />200 = 200 <br />2 = 230 (220 if 50 Hz) <br />4 = 460 <br />Frequency: <br />1= single-phase 60 Hz <br />3 = three-phase 60 Hz <br />5 = single-phase 50 Hz <br />Horsepower: <br />05 = 112 hp <br />07 = 3/4 hp <br />10 = 1 hp <br />15 = 1-1/2 hp <br />20 = 2 hp <br />30 = 3 hp <br />50 = 5 hp <br />Nominal flow (gpm): <br />10 <br />20 <br />30 <br />50 <br />75 <br />Pump (PF Series) <br />Note: 20 foot cords are available only for single-phase pumps through 145 hp <br />® ?LOA 0muce SystemO Inc. <br />1rTaPU-PFi <br />Rev. 1b. 0 7NA <br />Palo lof6 <br />