COMPLIANCE INFO_2013 - 2017 - Laserfiche WebLink

Home Browse Search

Maximize protection vacuum monitored secondary containment system. A Secondary Containment Vacuum Sensing System for use with Veeder- Root's ATG Systems. The Secondary Containment Vacuum Sensing (SCVS) System is designed to detect leaks in double - walled tanks and piping systems while helping to contain a release of product while under vacuum. The system consists of: Vacuum Sensors, connected to tank, sump or piping interstices A Submersible Turbine Pump (STP), to provide a source of vacuum A Smart Sensor Interface with Embedded Pressure Module in a TLS -350 Monitoring System The Vacuum Sensor is interfaced to Veeder- Root's TLS -350 Monitoring System via intrinsically safe wiring to provide system status, replenish rate, alarm, and diagnostic information. Vacuum Sensor Kits are available in a variety of models: • For monitoring double -walled piping and sump interstices • For monitoring double -walled steel tank interstices (see back page) • For double -walled fiberglass tanks These kits differ in the number of vacuum sensors and the configuration of associated liquid sensors. An inline kit mounted liquid sensor is used for Vacuum Sensors monitoring piping and sumps. An external liquid sensor (to be installed in the secondary space at the bottom of the tank) is provided with one of the Vacuum Sensors in the steel and fiberglass tank kits to monitor the tank. VEEDER-ROOT Features and Benefits Satisfy Requirements • Certified to meet California's requitement for secondary space monitoring for tanks and lines as requited by AB 2481 • Satisfies the requirements for Class 1 Leak Detection as defined by the European Standard EN 13160-2 • 3rd Pavy; National Work Group and LG113 listed Reduce Exposure to Risk • Alarms when vacuum cannot be maintained or when replenish rate exceeds 85 liters per hour • The system alarms when liquid is detected in the secondary space Operating Temperature Rating: -25 degrees C to +70 degrees C Cable Length: Sensor Dimensions: 5" high x 5" wide 2" deep Facilitates periodic operability testing Leverage Existing Veeder-Root Systems • Uses STP as the vacuum source and works with Red Jacket and FE STDs • Installs in the STP sump and corrects to the console via intrinsically safe wiring • Able to share wiring conduit with other Veeder-Root intrinsically safe (IS) probes and sensors including sump or line leak sensors • Interfaces to the Smart Sensor Interface with Embedded Pressure Module • Provides for positive shut down of pressurized lines when required • Simple irutallation, no need to mess with brine Console Capability The Vacuum Sensor is compatible with the following consoles: Console TLS-350R/EMC w/BIR' TLS -350 Plus/EMC Enhanced` TLS -351 res thcons Ie ade Note: vemor 2 soft�aSaw �re (mor greater) along with an ECPU2 or ECPU w/ NVIVEM 1 board. Standard Models Veeder-Root P/N Description Accessories Part Description Quantity/Length Part Number 1/4" NPT Barbed Fittings 3 330020-487 1/4" NPT Barbed Fittings 15 330020-488 Barbed Tee 1 576008-657 Vacuum Hose 25' 25' 332310-001 Vacuum Hose 50' 50' 332310-002 Vacuum Hose 100' 100' 332310-003 3—Way Ball Valve _ 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Fitting 15 330020-497 kits include mounting bracket, 6' of vacuum hose, relief valve assembly td required) and the appropriate number of liquid sensors, 3 -way ball valves, barbed fittings and hose clamps so that each vacuum sensor can monitor a single tank sump or piping interstices. The Vacuum Sensing System requires one 7 channel Smart Sensor Interface with Embedded Pressure Module, 8 channel Smart Senior Modules (phi 329356-004) can be used for Vacuum Sensors eight and above. For more information call: 1-888-561-7942