Laserfiche WebLink
6. Overfill Protection System (spill catchment basin(s) required) <br />A. Nonmotor ve 'cle fuels (See Option 1A) <br />1. Level sen g device and #2 or N3 below <br />2. Audible/visu alarm triggered to liquid level sensor <br />3. Automatic shut- f device <br />B. Motor vehicle fuels on y <br />1. Manual monitoring <br />a. Written filling procedure provided <br />/1[tV-- b. Procedure addresses all of the following: <br />1) Visual monitoring of fuel level and filling operation <br />2) Available caacity of tank is at 103% or +200 gallons <br />(2635- 9) (AM)(C)) <br />3) Metered input <br />Spill catchment basin size <br />1. Minimum 5 gallons <br />10. Secondary containers (Includes leak interception and detection systems). <br />A. Backfill in secondary container -( Article 3, Section 2635) <br />I. See Article 3 Section 2635(c) (1-8). <br />B. Two or more primary containers within secondary container (Demonstrate <br />product compatibilities). <br />C. Liquids detected in secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />Code 25291(e)(h). <br />��D. Water tight cover for secondary container excavation (Article 3, Section <br />2635(7)). <br />11. Piping <br />A. Double containment require"'" of r <br />1. Product and vapor recovery lines. <br />2. Vent line (excluded only—if ball float valve is installed). <br />