COMPLIANCE INFO_1998 -2011 - Laserfiche WebLink

Home Browse Search

FROM OIL EQUIPMENT PHONE NO. : 209 7545726 Jan. 16 2003 04:51AM P6 SWRCB, January 2002 Page 5 of 8 If the testing method docs not test the entire depth of the sump, specify how much of the sump was tested. Methods not testing the entire sump should only be used if the monitoring system provides fail-safe turbine shutdown. (See SWR.CB Lk; -160) 2 With the submersible pump running, place the sensor in product (discriminating sensors should also be placed in water). The time between placing the sensor in product and the turbine shutting down is the response time_ This should be done if the secondary containment testing method used does not test the entire volume of the sump. This information is not needed if the entire sump is tested. 6. PIPING SUMP TESTING: By: l l Sump Manufacturer 1.1 Industry Standard U Professional Engineer U Other (SpecJ}�)ed: EIMAvelopcd 0 Pressure 0 Vacuum Q Hydrostatic 0 Other(Specify) Test Equipment Used. Equipment Resolution: Sump # SUMP # Sump # Sump # Sump Diameter: Sump Depth: Sump Material: Height from Tank Top to Top of Ni hest Pi in Pcnetratian: w,�,.,_, Height from Tank Top to Lowest , Electrical Penetration: Condition of sump prior to testing: Portion of Sump Tested' Does turbine shut down when sump sensor detects either product U Yes U No U NA U Yes a No 11 NA U Yes u No U NA U Yes UNo UNA or water?' Turbine shutdown response time' Is system programmed for fail-safe U Yes UNo UNA U Yes U No UNA u Yes UNo UNA U Yes UNo UNA shutdown?' Was fail-safcverified to be IIYes UNo UNA UY&s UNo UNA LIYes UNo UNA Utes UNo UNA operational?' _ Wait time between applying pressure/vacuum/water and starting test. Test Start Time: Initial Reading (R,): Test End Time: Final Pleading (R,:): Test Duration: Change in Reading (%.-Ri)- Pass/ -ail Threshold or Cr'iter'a: Test Result. U Pass U Fall U Pass U Fall U Pass U Fall U Pass U Fall Was sensor removed for testing U Yes Li No U NA'? U Yes a No UNA u Yrs UNo UNA t_I Yes UNo UNA Was sensor properly replaced and u Yes UNo UNA U Yes LI No UNA U Yes 1.1 Na UNA U Yc s UNo UNA verified functional after testing? Coinments — Cinclude informati�lR on repairs made prior to testin ,and recommended odlow a or ailed tests If the testing method docs not test the entire depth of the sump, specify how much of the sump was tested. Methods not testing the entire sump should only be used if the monitoring system provides fail-safe turbine shutdown. (See SWR.CB Lk; -160) 2 With the submersible pump running, place the sensor in product (discriminating sensors should also be placed in water). The time between placing the sensor in product and the turbine shutting down is the response time_ This should be done if the secondary containment testing method used does not test the entire volume of the sump. This information is not needed if the entire sump is tested.